Do All Three Hinges Need to be Replaced with Controlled Motion RV Door Hinge  

The outer flange that sticks out to mount the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item #MA00-04401M is 16-1/4" x 16-1/4" so as long as you have at least 2-1/2" to 3" of space between the panel…

If the door hinge on your 2005 Winnebago Vectra has a similar design then yes, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf #LC95VR will work as a replacement. This is a universal product that has an overall length of…

To be effective you only have to replace one hinge of your RV door step with the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR with just one hinge installed the effect is provided and it will hold the step in place and not let it free…

The Replacement Controlled Motion Hinge for RV Entry Door #LC95VR that you referenced is designed to fit standard RV doors like what you have so this would fit and work great. Your door will no longer freely open or close too as it will stop wherever…

I do have a solution for your door swinging problem. You can use the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR (black) or #LC22NJ (white). This hinge will replace or upgrade the hinge on your RV door and uses controlled motion…

Yes, the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR can be used to upgrade the hinges on your Lippert entry door and be used in place of the gas strut. To be effective you only have to replace one hinge of your RV entry door with…

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

Hey Mark, thanks for all of the info you listed about your hub. With just that info we know that the hub/drum part #AKHD-655-35-EZ-K that you referenced is an exact replacement.

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

Based on what you are saying, it sounds like the detector is faulty and needs to be replaced; you did the right thing with vacuuming it and checking the batteries, as those are the two steps that need to be taken to ensure there isn't a…

I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap #DC200L-DCRP or get it in a 2-pack as part #RG04-040.

I am not sure what size would work best but we do have the Labeled Single Slide-Out Momentary Switch - On/Off/On - White #37213445 which would work great as a replacement for what you have now. This needs cut out dimensions of 1.85" tall x…