What is the Torque Rating for the Castle Nut to Hold on Trailer Idler Hub # 8-259-50UC1-EZ
Updated 03/17/2017 | Published 03/16/2017
Question:
What is the torque setting on the axle nut for this hub? Thank you for your time
asked by: Matt S
0
Expert Reply:
I checked with Dexter and on light duty hubs such as # 8-259-50UC1-EZ they recommend the castle nut be tightened to 50 foot pounds. If that makes it too tight then back off the nut some until it is no longer overly tight and the hub can be spun by hand.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Video: Hands-On with the Replacement Shock Absorber for Toledo Brake Actuators
- Q&A: Dimensions of Nylon Pivot Bushing for Toledo Brake Actuator
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: dexter 8 259
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Q&A: Should E-Track be Used in Bed of Trailer that Will Haul Dirt or Rocks
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Search Results: dexter hub assembly
- Search Results: trailer spindle nut
- Search Results: tang washer
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: stabilizer jacks
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles Feature Review
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Video: Detailed Breakdown of the BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles
- Video: All About the Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Q&A: How Long Should Trailer Wiring Stick Out Past The Trailer Tongue?
- Q&A: Recommended Replacement for Dexter 8-259 Idler Hub
- Q&A: Bearing Kit for Dexter 8-259 Trailer Hub
- Q&A: What is the Difference Between the Kenda S-Trail and Kenda KR25