Is the Falcon 2 Tow Bar RM-520 Rated to Tow a 2002 Chevy Tahoe 5.3L Vortec 4WD
Updated 01/25/2011 | Published 01/23/2011 >
Products Featured in This Question
Question:
Is the Falcon rated to tow a Chevy Tahoe? What additional parts are needed?
asked by: Doug B
Expert Reply:
I did some research on your vehicle, and it looks like the curb weight of your 2002 Chevrolet Tahoe model should be around 5050lbs. This would be under the 6000lb capacity for the Falcon 2 tow bar # RM-520, but you will also need to make sure that the tow vehicle and trailer hitch are both rated to handle this much weight.
I would also recommend that you double check the actual weight of the vehicle, including whatever gear you choose to carry in it, to make sure that it will definitely be below the 6000lb limit. You could do this at a local truck stop scale. If needed, we do offer the Blackhawk 2 tow bar # RM-422 which has a 10000lb capacity.
In a towing system, you are limited by the lowest capacity in the setup, whether this is on the tow bar, the trailer hitch, or the tow vehicle itself. If any part of your setup has a rating less than the weight of the Tahoe, you will not be able to tow this vehicle without switching out a component, if possible.
To wire the Tahoe to be towed, I recommend using wiring kit # 38955. According to my research, your vehicle should have separate amber turn signal and red tail lights, so the # 38955 kit would utilize your main red light for brake, turn signal, and tail light functions. If you want the amber turn signal lights to function, you would also need tail light converter # 118158 and two additional diodes, part # RM-792.
A magnetic light kit # RM-2120 would be an easy alternative if your motor home is already wired with a 4-Way flat plug.
I would recommend getting the RoadMaster release tool # RM-066, as it makes hooking up and disconnecting with the Falcon 2 much easier.
I am providing some links to additional information, including installation instructions and demonstration videos for the items I referenced that should be helpful for you.
Product Page this Question was Asked From
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount
- Telescoping - Binding
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates
- Stores on RV
- Cables Not Included
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Connect Roadmaster EZ Base Plate Kit 521877-1 To A Tow Bar
- Q&A: Full Flat Tow Setup for 2026 Ford Bronco Badlands With Roadmaster Falcon 2
- Q&A: Upgrading Older Weldex Rear Camera System In 2006 Holiday Rambler Class A RV
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: How Does the Curt RVi 4 Breakaway Cable Work with the Wireless Breakaway Adapter?
- Q&A: Recommended Baseplate and Wiring Harness for a 2026 Jeep Wrangler Rubicon
- Article: Trailer Wiring Diagrams
- Q&A: Looking for the Replacement Knob for the Battery Disconnect
- Q&A: Recommended Motorhome Storage System for a Roadmaster Guardian XL Rock Shield
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Must-Have Flat Towing Components
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: Roadmaster Vehicle Specific Base Plates
- Article: What Is a Supplemental Braking System?



