Parts Needed to Install 7-Way Connector with Test Lamps on 1997 Jeep Wrangler

Updated 02/07/2017 | Published 02/05/2017

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3400)

$103.72

Wire Loom, 1/2" Diameter (per Foot)

(293)

$2.32

Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers

(159)

$48.60

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$124.90

Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps

(312)

$41.73

Deka Cable Ties Kit - UV-Resistant - Black - 50 lb Tensile Strength - 11" Long - Qty 25

(41)

$2.83

Hook Probe Circuit Tester

(61)

$13.33

Question:

I want to buy your trailer wiring kit ETBC7, but I would like to have the 7 pin receiver like in the curt kit 57674. Is there a kit made with it? Thanks

asked by: Adam A

Helpful Expert Reply:

I do have a solution for you, however we do not offer a full kit like the Universal Wiring Kit # ETBC7 that includes a connector with test lamps.

You can use the Curt Adapter # C57674 referenced in your question along with the Draw-Tite Wiring Kit # 5506 to install the 7-way and brake controller. Additional parts that are included in the Universal Kit # ETBC7 that you may wish to obtain separately are Cable Ties # DW05726-25, Wire Loom (sold by the foot) # 459075-1 and a Circuit Tester like part # PTW2993.

If you are needing a brake controller to power your trailer's electric brakes, I recommend the Tekonsha Prodigy P2, part # 90885. This is a great proportional brake controller with a digital display and continuous diagnostics. I have included a video review of this product as well as installation instructions for you to check out.