Can I Change a 5 on 4-1/2 Drum With A 5 on 5 Drum For A Trailer With 3,500 lb Axles
Published 01/11/2017
Products Featured in This Question
Question:
What is the difference of 3500 lb axles or BT8, BTR and 84 Spindle. Thank you.
asked by: Bob A
Helpful Expert Reply:
As long as the drums have the same weight capacity as the axles that you are putting them on then there should be no problems there. If you don't already have the 5 on 5 drums that you are asking about, I recommend using the E-Z Lube Hub and Drum Assembly # 84556UC3-EZ. It has the E-Z lube cap on the end of the drum so if you have E-Z-lube axles it makes greasing your axles easier. It also works great with axles that do not have the E-Z lube option.
Since you are taking the 5 on 4-1/2 drums off of an axle that has a weight capacity of 3,500 lbs and you're moving them to an axle that has a 3,500 lbs weight capacity as well, there won't be any issues with that. If you think that you might need some new bearings on your 5 on 4-1/2 drums you can check out part # BK2-100.
If you would like to install brakes on your axle I recommend the Electric Trailer Brake Assembly both the Right Hand # AKEBRK-35R-SA and the Left Hand # AKEBRK-35L-SA.
I have included some demonstration videos for you as well.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 58846
- Search Results: morryde
- Search Results: morryde equalizer
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement U-Bolt Axle Mounting Hardware Kit - 3" Axles
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Q&A: Initial Adjustment Of Self-Adjusting Electric Brakes On Trailer
- Q&A: Comparing the etrailer and Dexter Braking Assemblies for a 3,500 Lb Axle
- Q&A: Replacement Leaf Springs For A Tandem Axle Trailer With Flattened Leaf Springs
- Q&A: Can Different MORryde X-Factor Crossmembers Be Used On The Same Trailer?
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Torque Specifications on Lug Nuts, Leaf Springs, and Equalizers.
- Video: An In-Depth Look at the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles Review
- Q&A: Recommended Hub and Drum Assembly for Homemade Trailer with Rubicon Wheels
- Video: Let’s Check Out the Dexter Electric Trailer Brakes
- Video: Hands-On with the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Video: Suspension Kit for Tandem-Axle Trailers Feature Review
- Video: Breaking Down the Dexter Trailer Axle w/ Electric Brakes
- Article: Trailer Wiring Diagrams
- Search Results: l44649
- Search Results: bearing l68149
- Search Results: bearing covers
- Search Results: bearing l44643 trailer bearings races seals caps
Bob
1/11/2017
What is the difference of 3500 lb axles or BT8, BTR and 84 Spindle. Thank you.