Anchor Recommendation for E-Track for Securing ATV

Updated 11/28/2016 | Published 11/26/2016

Products Featured in This Question

Erickson E Track Tie Down Ring - 2,000 lbs

(918)

$12.95

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs

(918)

$10.73

Question:

Hi, Im looking for a fitting for the e track system that will work good for securing an atv. Im wondering what would be better. Im looking at either the e track o ring heavy duty tie down Or looking at the e track rope tie off. What would you recommend. I would be coming from the floor of the trailer and the would be coming up to the atv at an angle. The atv would be tied down with what I call a X. I like the idea of the o ring but Im not sure if it will have enough play to be able to make a X tie down. Are the o rings designed to go straight over the top when securing a load or can they be used effectively by running a strap from the o ring in the corner of the trailer to the center. Thank you for the help. Please let me know if that doesnt make sense Thanks,

asked by: Bryan

Expert Reply:

For an anchor for an E-Track setup you would want the part # 59147 as it has a high capacity. Using a strap mounted setup like the part # E59143 is an additional option but they have lower capacities and since you want to pull at an angle the O anchor would be a better option.

expert reply by: Jameson C