Optimal Direction of Pull When Using E Track

Updated 12/02/2009 | Published 11/28/2009

Products Featured in This Question

Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

(1206)

$43.38

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs

(910)

$8.17

Question:

When useing E trac does it matter which direction tie down straps pull when mounted on floor. Should pull be the direction that trac runs or can pull be up to 90 degrees.

asked by: Nick H

Expert Reply:

In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running.

How much the capacity would be diminished by pulling 90 degrees to the side will depend on the weight of the load. If the load is close to the capacity of the straps, pulling out 90 degrees could damage the clip that locks the strap into the track or possibly damage the track itself.

You may also be interested in purchasing a E-Track 2 inch D-Ring, part # E59143.

I attached a link to a review video of this product to the right for you to check out also.

expert reply by: Mike L