Need Wiring Harness to Install My Tekonsha Prodigy P2 Brake Controller In A 2016 Silverado 2500

Question

Question:

i have a prodigy p2 , i need the harness to install it in a 2016 silverado 2500hd truck, what part number is it, i had the controller in a 2015 nissan frontier and let the harness go in a trade in.

asked by: Richard

0

Expert Reply:

For your 2016 Chevrolet Silverado 2500, the brake controller wiring adapter you want is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, # 3016. This will plug directly into your truck under the dash and into your Tekonsha Prodigy P2, # 90885, brake controller. I've attached a review video and an installation video for you.

expert reply by: Jason S

0

Answer 1

I checked your order notes and it looks like you bough the Pod Brake controller #39523 but did not also order an install harness for your truck. The correct harness you'd need is the part #3016. Since these brake controllers can fit almost any…

view full answer...

Answer 2

If you are wanting to hardwire the Tekonsha P3 Trailer Brake Controller #90195 (great choice!) to your 2015 Chevy Silverado 3500 that has the factory controller, you will just need to locate the cold side of the brake light switch. This is the wire…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Need Wiring Harness to Install My Tekonsha Prodigy P2 Brake Controller In A 2016 Silverado 2500

Featured Help Information

Miscellaneous Media

Continue Researching