What is the Thread Pitch for 2 Inch Hitch Ball # 19258

Question

Question:

What is the thread pitch/size of trailer balls with a 3/4inch shank?

asked by: James E

0

Expert Reply:

If you are buying a new ball such as # 19258 then its thread pitch doesn't matter because it comes with a compatible nut. This ball has 16 threads per inch which is about 0.05 inches from the top center of one thread to the top center of the next.

expert reply by: Michael H

0

Answer 1

Hey Andrew! The only hitch that fits your 2023 BMW X5 M Competition is the Stealth Hitches Hidden Rack Receiver #SH64MR. What will you be using the hitch for? If you plan on towing, the #SH22MR comes with the towing kit which has the wiring harness…

view full answer...

Answer 2

I can confirm that the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH22MR does fit the 2022 BMW X5 M Competition.

view full answer...

Answer 3

Hi Carl; I'm not entirely sure what the BMW dealer meant but I can tell you it is possible to install a hitch and wiring on your 2024 BMW x5 50e. Assuming you do not have the true M model (probably isn't since the 50e is hybrid) you can use…

view full answer...

Answer 4

For the 1 inch diameter shank hitch balls like #63845 the fine thread shanks have 14 threads per inch and the coarse thread shanks have 8 threads per inch. Most are fine thread.

view full answer...

Answer 5

All of the 2" hitch balls with a 1" diameter shank that we carry are fine threaded so 14 threads per inch. A ball like the #63845 comes with a lock washer and nut to attach it to a ball mount. Unless you need to thread it into something…

view full answer...

Answer 6

For the 1 inch diameter shank hitch balls the fine thread shanks have 14 threads per inch and the coarse thread shanks have 8 threads per inch. To get 12 threads per inch would require you to go with a 1-1/2 inch diameter hitch ball. But if you have…

view full answer...

Answer 7

If you are looking at the balls that come in the etrailer ball mount kit #989900, ball #19247, is coarse threaded and has a 1-1/2 inch nut and lock washer included. Ball #19260 is also coarse threaded and it also comes with a nut and lock washer. You…

view full answer...

Answer 8

If you are looking at the balls that come in the etrailer ball mount kit #989900, ball #19247, is coarse threaded and has a 1-1/2 inch nut and lock washer included. Ball #19260 is also coarse threaded and it also comes with a nut and lock washer. The…

view full answer...

Answer 9

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

What is the Thread Pitch for 2 Inch Hitch Ball # 19258

Continue Researching