How to install Full Size Locking Steel Flush Door Latch on a Trailer
Updated 10/25/2016 | Published 10/24/2016
Question:
Id like to order this item as a replacement, but Im unsure how to remove old lock and replace. please advise. Thanks
asked by: Barbara D
Expert Reply:
The Full Size Locking Steel Flush Door Latch # L3980 is designed to fit 1-1/16 inch thick doors and mounts in a hole that is 4-5/8 X 3-3/8 inches. If there are no screws visible, then your existing latch is likely welded on, and you will probably have to cut off it off to get started. Be sure to be cautious when removing your old latch, so you don't damage your trailer door in the process. If you're able to send some photos, I can give you a better idea about how to start removing the original latch. You will also need screws or pop rivets to install your new door latch. Drilling pilot holes in each corner of the new latch will be necessary as well.
Please check out the attached review video with additional info.
Product Page this Question was Asked From
Full Size Locking Steel Flush Door Latch
- Trailer Door Latch
- Latches
- Flush Latch
- Steel
- Built In Lock
- 3-3/8 x 4-5/8 Inch Cutout
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Bauer Products Trailer Door Latch - Latches - Locks - BA28UR
- Video: Detailed Breakdown of the Bauer Products Manger Door Lock for Horse Trailers
- Shop: Square Corner T-Strap Hinge w/ Reverse Bracket - 270 Degree - 16" Long - Zinc Plated Steel
- Shop: "Junior" Locking Stainless Steel Flush Door Latch
- Shop: Paneloc Slam Latch with Cover - 1-1/2" Long x 1-1/4" Wide - Zinc - Reverse Angle Pin
- Q&A: Recommended Entry Door Latch For A Horse Trailer Mid-Tack Room
- Shop: 1-1/2" Wide Continuous Hinge - 6' Long - 1/8" Pin Diameter - Aluminum
- Shop: Square Corner T-Strap Hinge w/ Reverse Bracket - 270 Degree - 16" Long - Aluminum
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Article: Trailer Lighting Requirements
- Shop: Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Search Results: trailer light grommet
- Search Results: 2" grommet
- Video: Checking Out the PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Search Results: clevis
- Search Results: chain link
- Search Results: safety chains
- Q&A: Replacement Strap Hinge for Enclosed Cargo Trailer
- Video: 1-1/2" Wide Continuous Hinge Spec Review
- Video: Review of Polar Hardware Trailer Door Latch - Latches - PLR7011S
- Video: Detailed Breakdown of the Square Corner T-Strap Hinge w/ Reverse Bracket
- Video: Breaking Down the Square Corner T-Strap Hinge w/ Reverse Bracket
- Q&A: Recommended Solution to Bolt on Safety Chains to Utility Trailer
- Search Results: t handle latch
- Q&A: Recommended Flush Door Latch for Wells Cargo Trailer
- Q&A: Looking for Replacement Door Latch/Lock for 2021 Cynergy Cargo Trailer
- Q&A: What Door Latch Replacement do You Have for My Old Wells Cargo Recessed Door Latch Cutout 5"x6 1/2"
- Q&A: Is There An Offset Gooseneck Ball For 2017 Ram 2500 With Factory Puck System?
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
on Trailer Door Latch
