How to Convert 3,500 lb Dexter Axle from Wheel Bolts to Wheel Studs

Published 09/22/2016

Products Featured in This Question

Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased

(1488)

$49.59

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased

(1845)

$113.96

Question:

I have a vintage 1982 Avion triple axle travel trailer. Each wheel is secured with 6 lug BOLTS. I want to install lug studs that will be appropriate for my trailer. The axle is a 3500# Dexter axle. The hub bolt pattern is 6 X 5.5. I believe the lug bolts are 1/2 - 20 bolts. Is the 25-53 stud appropriate for the job?

asked by: Dale C

Expert Reply:

I have a solution for you, but you would not be able to thread in wheel studs to your hub that uses lug bolts.

Instead you would need to replace the hub with one that has studs mounted in them. For that we have the part # AKIHUB-655-35-K for an idler hub or part # AKHD-655-35-EZ-K for a hub drum. Both of these will fit your Dexter 3,500 lb axle and have the correct 6 lug bolt pattern.

expert reply by: Jameson C