Does Solera Slider Toppers Come with Awning Rails

Question

Question:

In description it says doesnt include awning rail. Why? Wont I need it to install it on my slide out?

asked by: Wade G

0

Expert Reply:

Solera recently decided to start including awning rails with their slide toppers.

expert reply by: Jameson C

0

Alan J.

2/17/2024

Is it possible to order without the awning rail? Our trailer has the rails already installed. It would just be an extra part. Thanks.

Jameson C.

2/19/2024

@AlanJ At this time there isn't.

Answer 1

If the flange-to-flange width of your slide out (widest point of slide-out) measures 153 inches, I'd recommend the Solara #LCV000168109 slide out topper, in black which is what Solara recommends for slide-outs measuring between 152-157 inches…

view full answer...

Answer 2

Slide toppers like the Solera RV Slide-Out Awning #LCV000168109 need to be rolled 12 - 16 times for proper tension.

view full answer...

Answer 3

For a 153-1/2" slider we have two options, one in black and one in white. I have listed both of them below: White - Solera RV Slide-Out Awning item #LCV000163300 Black - Solera RV Slide-Out Awning item #LCV000168109 Please note that if you…

view full answer...

Answer 4

Thanks for all that info and I can tell you exactly what awning slide toppers you need for each of the flange to flange measurements you provided. - 72-1/2 Inches: Solera RV Slide-Out Awning #LCV000163279 (White) or #LCV000165063 (Black) - 78-1/2…

view full answer...

Answer 5

Since we know your slide out flange measurement is 153 inches from flange to flange the correct slide out awning would be the part #LCV000168109 for black or part #LCV000163300 for white.

view full answer...

Answer 6

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for even…

view full answer...

Answer 7

Hello Jacques, thanks for reaching out. Yes, you can put just one MORryde X-Factor Crossmember #MR33WR on the center hanger for starter. MORryde does recommend doing all 3 for optimal support, but it is perfectly acceptable to start with just one as…

view full answer...

Answer 8

The MORryde X-Factor Crossmember uses 2 of the Wet Shoulder Bolts #MR52HR. I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 with these bolts. This grease is formulated to work well in both hot and cold climates. It is also…

view full answer...

Answer 9

Hey Alen, no, the Replacement Wet Shoulder Bolt #MR52HR does not come with a nut. You'd need to order the Replacement Grade 5 Flange Lock Nut for MORryde Suspension Upgrade Kits #MR85DR separately. Let me know if there is anything else I can do…

view full answer...

Answer 10

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Does Solera Slider Toppers Come with Awning Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching