How to Determine if B and W Companion Hitch Would Fit with Truck Bed Tool Box  

The head of the Demco Recon 5th Wheel Trailer Hitch #DM8550043, which can be found as part #DM6169, weighs about 47 lbs. The base, which is part #DM6180, also weighs in at about 47 lbs. This puts the total weight of the Recon just under 100 lbs.

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs #DM8550035 is not compatible with the B&W turnoverball gooseneck hitch #BWGNRK1314. The handle for the gooseneck ball will not work with the 5th…

The Demco Recon Gooseneck Hitch Adapter #DM8550045 referenced in your question is designed to attach to an existing gooseneck hitch ball on the truck. It is indeed a nice lightweight option but it likely won't provide the needed cab clearance to…

Yes, Demco does have the 21K Autoslide #DM89GV as well as an 18K Autoslide #DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to…

The total weight for the Curt hitch part #C16521 that you referenced is 193 lbs. Slider hitches in general are pretty heavy since there is a lot of moving parts which have to be very strong. The Reese 16 part #RP30047 is an excellent hitch that…

You are going to want the slider version of the Companion Hitch part #BWRVK3400 unless your trailer happens to have a narrow nose designed for allowing short bed trucks turning clearance without a slider. You would know if your trailer had this too.…

The total weight of the Curt A20 5th Wheel Trailer Hitch Item #C16541 Is roughly 220lbs, but the head can be separated from the base by removing the pin to make it easier to remove.

The correct Sidewinder wedge to use with the Demco Recon fifth wheel hitch part #DM8550043 is the Reese Sidewinder wedge part #RP74FR.

I have two options for you but there is no way to use an auto-sliding 5th wheel hitch with the B&W Turnoverball Underbed Gooseneck Trailer Hitch installed because there is no room for anything else to mount and you can't use an adapter…

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

The Curt A16 5th Wheel Trailer Hitch w/ R16 Slider #C16521 referenced in your question features a non-binding slider that will require manual operation before making a tight turn. This is not an automatic slider. If you would like the convenience of…

Air is still able to flow through the punch plate on the Westin HDX Grille Guard #57-3680 for your 2014 Chevy Silverado 1500 so you should not notice much, if any, change in temperature with the guard installed. If you work or live in a hot climate…