Can a 2013 Honda Fit with Automatic Transmission Be Flat Towed
Published 08/17/2016 >
Products Featured in This Question
Question:
Can a 2013 Honda Fit with automatic transmission be flat towed behind an RV?
asked by: John
Expert Reply:
I did some checking and it looks like your 2013 Honda Fit with an automatic transmission can be flat towed as long as you keep it under 65 mph. I would recommend you consult your owners manual as well to confirm this.
For a base plate kit you would want the part # 521190-1 which is a confirmed for your vehicle.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Universal Magnetic Tow Lights - Red LEDs - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 4 Flat
- Peterson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Q&A: Complete Flat Towing Setup for a 2026 Ram 2500 Behind a Motorhome
- Q&A: Can 4-Flat Plug Be Cut Off Of Blue Ox Plug-In Tow Bar Wiring Kit BLU92HR
- Q&A: Recommended Hitch for a 2025 Toyota Corolla LE
- Article: Flat Towing Package for 2025 GMC Sierra 1500
- Q&A: Parts Needed to Flat Tow a 2013 Chevrolet Sonic Sedan Automatic Behind a Motor Home
- Q&A: Is Vevor RN-QVR 7500 Tow Bar Compatible With Blue Ox Base Plates
- Q&A: Is the Replacement Wheel # DM11574 from Demco the OEM Wheel for the Kar Kaddy SS Tow Dolly
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Must-Have Flat Towing Components
- Article: Trailer Wiring Diagrams
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: Trailer Hitch Installation Tips



