Towing Fifth Wheel Trailer With 2006 Nissan Titan
Updated 07/13/2016 | Published 07/12/2016 >
Products Featured in This Question
Question:
We have a Nissan Titan 6-1/2 foot bed and are looking at purchasing a 5th wheel with a ball hitch gooseneck? - the trailer weight is 6290# dry weight. Im trying to figure out pin weight etc - to see if we will be capable of towing with out blow out the rear end.
asked by: Bonnie
Expert Reply:
From what you describe, your trailer isn't very heavy. Pin weight can range from 15-20 percent of the trailer weight, or up to 25 percent for some larger toy haulers. Worst case scenario, you're looking at about 1500 lbs or so of pin weight which is pretty minimal.
To determine the towing capacity of your truck, take a look at the sticker on the driver's door jamb. Look for the GCWR, the gross combined weight rating. This represents the maximum amount the trailer and truck can weigh. If you subtract the fully loaded vehicle weight (curb weight plus weight of passengers and cargo) from the GCWR, the remainder will be the maximum trailer weight your truck can tow. Your truck should be able to pull the trailer you described with no problem, but find the GCWR and do the math to make sure.
I'd recommend you consider a suspension enhancement product like the Timbren # TTORTUN4 for 2WD vehicles or # TNRTTN for 4WD. The Timbrens won't effect your truck's ride unless there's a load in the bed or pin weight from a trailer is being applied to the rear axle.
Trailers for recreational use will usually have a king pin, which uses a 5th wheel hitch. Gooseneck trailers are more frequently used for agricultural or commercial uses. If you'll be pulling both types of trailers, it's best to install a fifth wheel hitch using the bed mounted rails. When you pull the fifth wheel, install the hitch in the bed mounted rails. If you need to tow the gooseneck, you can install a gooseneck plate like # 16055 on the rails.
If you have a 6-1/2 foot bed, you'd need a sliding hitch in order to provide enough space between the cab and the trailer for making turns without the front corner of the fifth wheel hitting the back of the truck cab. The Reese # RP30051 has a 16K capacity and is a good and reasonably priced choice. You'd also need the # RP30035-405 install kit.
To install a 7-way trailer connector in the truck bed, use part # 41157.
Product Page this Question was Asked From
Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- 5th Wheel Trailer to Gooseneck Hitch
- Provides Extra Clearance
- 20000 lbs
- Bolts Over King Pin
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Q&A: Recommended 5th Wheel Hitch For A 2005 Ford F-250 Short Bed
- Q&A: Does Convert a Ball Fifth Wheel to Gooseneck Offset Adapter Provide Turning Clearance
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Will B and W Fifth Wheel to Gooseneck Adapter Void Lippert Warranty
- Q&A: Correct B&W Companion Hitch Base For 2024 Chevy Silverado 2500 Short Bed With Factory Puck System
- Q&A: Install Instructions and Install Video for Convert A Ball Fifth Wheel to Gooseneck Adapter
- Q&A: Which Cushioned Pin Box is Best MORryde Goosetec, B and W or Gen-Y Executive
- Q&A: Dimensions of MORryde Goosetec # MR97MV
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Most Popular Wheel Bearings
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips


