Trailer Hitch, Ball Mount, Ball, and Trailer Wiring Recommendations for a 2011 Kia Sorento SX

Updated 09/22/2010 | Published 09/21/2010

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(465)

$216.92

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(85)

$86.22

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2621)

$11.37

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.62

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

(3839)

$30.92

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(809)

$83.83

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1674)

$74.95

Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span

(895)

$13.90

Question:

The SX model has a different bumper and exhaust tips that come past the bumper. The Curt hitch does not fit, will this hitch fit?

asked by: Steve

Expert Reply:

I spoke with my contact at Draw-Tite regarding Trailer Hitch, # 75684. He stated that there are no exclusions for the trailer hitch which means that it should fit all models, including your 2011 Kia Sorento SX. I have included a link to the installation details below.

If you plan on doing some towing, the recommended ball mount is # C45010 and you can use ball # 19260 (1-7/8 inch diameter) or the # 19247 (2 inch diameter). For trailer wiring, use # C56332 if your SX model has the Factory Tow Prep Package, or # C59236 without the tow package. You will also need a pin and clip # PC3 since the ball mount # C45010 does not include one.