What Does the 2-1/4 inch Dimension of a 10 inch by 2-1/4 inch Hub and Drum Represent
Updated 04/27/2016 | Published 04/24/2016
Question:
On a 10inch X 2 1/4inch drum how are you getting the 2 1/4inch measurement?
asked by: Russ
1
Helpful Expert Reply:
That would be the depth of the inside of the hub. If you check out the picture I attached the blue lines represent the depth. This will also be the width of the brake shoes on the brake assemblies.
I attached a review video for this hub for you to check out as wel.
expert reply by:
Jameson C
1
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Trailer Hub Assembly with 1-1/4 Inch Inner Bearing and 1-1/8 Inch Outer Bearing
- Shop: Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 12,000 lbs
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 6 on 5-1/2 - Galvanized
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: TruRyde Electric Brake Assembly - Self-Adjusting - 12" - Right Hand - 7,000 lbs
- Q&A: Can 2002 Shoreland'r Boat Trailer have Disc Brakes Installed
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Replacement Brakes And Drums For A 7k Rated Sloan Kwik Load Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes