Where to Place Axles on a 16 Foot Long Trailer
Updated 03/10/2016 | Published 03/09/2016 >
Question:
My trailer bed is 16 foot long and I have a 5 foot 6inch tongue and it is 5foot wide cant weigh trailer so could you give me a good starting point from the end of the tongue to the center of the equilateral in feet and inches the frame is made of 6 inch channel
asked by: Gordon M
Expert Reply:
To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger.
The center point of your equalizer hanger should start where you will have 60 percent of the frame of the trailer in front of the center of the equalizer hanger and 40 percent behind the center of the equalizer hanger. For example, if the trailers frames length is 16 feet, then the center-line location for the equalizer hanger will be 9.6 feet from the front of the trailer and 6.4 feet from the back.
This is where to start with when picking out axle locations for a tandem axle trailer. You will need to determine the tongue weight of the trailer and then check out the picture I attached if the tongue weight is anything other than 10 percent of the total trailer weight.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 1/2 lug nuts
- Search Results: lugnut
- Search Results: dexter 8 248
- Search Results: trailer hanger
- Shop: Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Shop: Kenda Karrier KR35 ST185/80R13 LRD Radial Trailer Tire w/ 13" Black AM03 Wheel - 5 on 4-1/2
- Q&A: Can I Upgrade 3,500 lb Axles to 5,200 lb Axles on a Budget
- Q&A: What is Needed to Upgrade From 3,500 lb to 5,200 lb Axle
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Black Aluminum Wheel - 5 on 4-1/2
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2
- Shop: CE Smith Trailer Wheel Lug Nut - 1/2" Diameter x 1-1/4" Long - Chrome - Qty 1
- Shop: Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Replacement Axle for Homemade Trailer
- Q&A: How to Wire the Lights in the Optronics Tail Light Kit # TL29BK
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Article: Double-Eye Trailer Suspension System Review
- Video: Review of Terran Industries Trailer Suspension Parts - Tandem-Axle Hanger Kit - TX65VJ
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Advice For Installing Leaf Springs on a Double Axle Trailer
- Video: Let’s Check Out the Replacement Equalizer for E-Z Flex Suspension Kits
- Search Results: trailer suspension parts
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Search Results: leaf spring mounts
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Search Results: trailer lights
- Video: What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers



