Replacement Bearings and Hubs for Hudson Tandem Trailer
Updated 03/07/2016 | Published 03/04/2016
Products Featured in This Question
Question:
I have a Hudson trailer with a inner spindle bearing diameter of 1.37inch ID and 1.25inch ID outer bearing. Im in search of replacement hubs or bearing kit.
asked by: Brian P
Expert Reply:
The easiest way to find replacement bearings and a compatible replacement hub is to locate the original bearing part numbers. The linked photo shows the typical location and appearance of these part numbers. If you cannot find part numbers you can measure your spindle to three decimal places (such as 1.234) using a precision caliper like # PTW80157.
If you find your bearing numbers you can simply search our site using those numbers. If you have dimensions you can use the linked page which has filters that allow you to select your inner and outer bearing diameters.
You can use a bearing packer like # ALL647646 and a grease gun like # PTW54290 to grease your bearings without the usual mess. You can use grease like # L11390.
Replacement hubs must use the same bearings that you have now in order to ensure that they will fits the spindles.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Feature Review Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Q&A: What is the Correct Hub Replacement for Dexter 8-208?
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: Hands-On with the Trailer Brake Mounting Flange for 3-1/2" Axles, 12-1/4" Brake Assemblies
- Video: Complete Breakdown of the Brake Mounting Flange for 3" Round Axle
- Shop: etrailer Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch - 5" Long
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Shop: Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Q&A: Troubleshooting 7-Way Trailer Wiring with Colors That Don't Match Functions
- Article: How to Measure a Trailer Axle
- Search Results: trailer hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: One Year Later | Firestone Airide Helper Springs and Heavy Duty Air Compressor
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer hubs and drums
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
