Recommended Lug Nut Torque for 1/2 Inch Wheel Stud on 5-Lug Steel Rim
Updated 03/02/2016 | Published 03/01/2016
Question:
Just wondering what the lug nut torque for a 1/2inch wheel stud on five lug steel rims. Thank you,
asked by: Craig
0
Expert Reply:
For a 5 lug steel rim, the recommended lug nut torque on a 1/2 inch wheel stud is between 75-85 foot lbs.
expert reply by:
Mike L
0
click to enlarge
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- J - 62 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range D
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E
- Q&A: How to Dolly Tow a Front Wheel Drive Vehicle
- Q&A: Tow Dolly for Front Wheel Drive Vehicle with Electric Power Steering
- Q&A: Looking For New Wheels And Tires For 1967 Streamline Duke Trailer With 7.00-15 6-Lug Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Pilot Diameter on a Wheel
- Q&A: Kenda vs Taskmaster Wheel and Tire Comparison for 4.80-12 on 4 Bolt Wheel
- Q&A: Looking For Tire With Higher Speed Rating For Loadrite Trailer With 4.80-12 Tires
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: How To Read A Tire Sidewall
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Electric Brake Controller Installation on Dodge Ram Trucks to 2012