Compatibility of Lippert LC308287 Spring Loaded Pull Pin w/ 2-1/4 Inch Leg 5th Wheel Landing Gear

Question

Question:

these quick release pins are showing they fit 1.25 diameter leg,is this correct? my legs are 2.25. 1.25 seems very small

asked by: Gary J

0

Expert Reply:

I'm not certain where the 1.25 diameter came from. The Lippert Components # LC308287 Landing Gear Pull Pins are designed to work with square tube legs that measure 2-1/4 inches square.

If your landing gear legs are constructed of 2-1/4 inch square tube, the # LC308287 pull pins would work well for you.

expert reply by: Mike L

0

Answer 1

The Ultra-Fab Spring-Loaded Quick Pins for Landing Gear Drop Legs - 3/8" Diameter - Qty 2 #UF17-943031 is the replacement you are seeking for your landing gear. These spring loaded pins work great to give you easy operation of your drop leg…

view full answer...

Answer 2

I recommend sticking with the Lippert Quick Release 5th Wheel Gear Pull Pins #LC308287 as they are specifically designed for the Landing Gear #LC362485 for Lippert Ground Control 3.0 #LC675817.

view full answer...

Answer 3

You could use the Landing Gear part #RVLG-8HDL as a replacement for what you have now on our 2011 Wildcat by Forest River. This will bolt right up in place of what you have and has plenty of capacity at 8,000 lbs so it will operate easily.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Charles, Yep, the Demco Autoslide 5th Wheel Trailer Hitch for Chevy/GMC - Single Jaw - Underbed #DM36SV is a kit that includes the Underbed Rail and Installation Kit #DM8551004 and the Demco Autoslide 5th Wheel Trailer Hitch #DM8550022. The…

view full answer...

Answer 6

Hey Michael! For some reason Toyota decided to use a double wall design on their receivers, which is why your old hitch pin won't fit. I recommend the InfiniteRule Hitch Lock for 2-1/2" Hitches #34061072-D for your 2022 Tacoma. This has a…

view full answer...

Answer 7

Hey Lina, we have the Caliber Trailblazer ATV/UTV tie down kit part #CA84AJ that can fit tire diameters that are between 25 and 35 inches. What UTV do you have? In a comment below a customer of ours was able to use the part #EM98CV as well although…

view full answer...

Answer 8

Hello Kirt, thanks for reaching out. The Fulton Single Axle Trailer Fenders #F008595-2 are the closest thing we offer to the Ez-loader 250-023712-10 fenders you are looking for. The Fulton #F008595-2 fenders are gray in color and they are…

view full answer...

Answer 9

Hey Tyler, so the difference is the amount of motors that each has. The Lippert PSX2 has two and the Lippert PSX1 like the part #LC298707 has a single motor. The foot print and mounting etc. is exact same so this will fit and work great in place of…

view full answer...

Answer 10

The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round #LC314667 does go inside the square leg that holds the pad. I've attached a photo to assist. It will fit the standard landing gear tube dimensions like you have on your…

view full answer...

Answer 11

There is a great chance either of the legs you mentioned would work as a replacement, but I'd need to know for sure what landing gear you have on your trailer. The Lippert landing gear like the part #LC179013 and #LC179014 are very popular and…

view full answer...

Answer 12

It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…

view full answer...

Compatibility of Lippert LC308287 Spring Loaded Pull Pin w/ 2-1/4 Inch Leg 5th Wheel Landing Gear

Product Page this Question was Asked From

Continue Researching