Can Chain and Hooks be Routed through Stake Pocket Tie Down with D-Ring for Trailers

Updated 02/11/2016 | Published 02/10/2016

Question:

I was wondering if this stake pocket T355 with the 1-3/8inch d-ring opening would be able to put a 3/8inch tie down chain with a hook, threw the d-ring and also use a binder for a Kioti 3200# compact tractor . I have to use 2 chains with load binders running them through the stake pockets ,through the tractor frame and another chain through the back axles.

asked by: Jerry

Expert Reply:

The 3/8 inch chain would not be a problem but the hook could be depending on its size. If you can't run the chain through backwards or there are hooks on both ends of the chains you have then the hook needs to be less than 1-3/8 inches high and 2 inches wide (at any angle that would allow it to slip through the opening on # T355) for this to work. We have some chains but none that are designed for this type of application.

But we do have load binders if you need them. I have included a link to the options for you.

expert reply by: Michael H