Hitch Pin Hole to Support Gusset Distance on Curt 10K Ball Mount 8-1/2 Inch Drop

Updated 01/26/2016 | Published 01/25/2016

Question:

What is the measurement from the center of the 5/8inch pin hole to the back of the gusset plate the gusset plate edge closest to the 5/8inch hole . Thanks!

asked by: Bob

Expert Reply:

On Curt ball mount # C45338 it measures approximately 5 inches from the center of the pin hole to the support gusset. However, the welds could be slightly different from one to the next so on some it will be less and others it will be more but only by a fraction of an inch. I have linked a video review of this ball mount for you.

expert reply by: Michael H