How to Install the Probe in Adjustable Fan-Control Thermostat with Radiator Hose Probe # D16769
Updated 07/12/2010 | Published 07/09/2010
Question:
how is the probe installed in the radiator hose? thanks
asked by: david w
Expert Reply:
To install the probe in the Derale Adjustable Fan-Control Thermostat with Radiator Hose Probe, # D16769, first, the remove radiator clamp and hose. Next, insert thermostat probe into the upper radiator hose. Then, place the capillary tube on the radiator inlet tube so the probe itself will remain positioned in the hose. Place the foam pad between the capillary tube and the radiator inlet tube. Then, carefully install the radiator hose and tighten the hose clamp. It is recommended that a screw type hose clamp is used for correct sealing as factory type clamps can leak. Double check coolant level, and fill as needed.
Product Page this Question was Asked From
Derale Adjustable Fan-Control Thermostat with Radiator Hose Probe
- Accessories and Parts
- Radiator Fans
- Thermostat
- 16 Amps
- Derale
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Furrion Chill Cube Operate With RV Furnace
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector