Automatically control your electric radiator fan with this adjustable, in-hose, thermostatic switch. Set the turn-on temperature anywhere between 32 and 240 degrees, and the power-saving shut-off falls just 10 degrees below.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Derale Adjustable Fan-Control Thermostat with Radiator Hose Probe. Now this will automatically control your electric radiator fan with this adjustable in hose thermostat switch. This'll provide the necessary air flow for sufficient cooling by switching your radiator fan on when the fluid reaches a set temperature. The temperature setting, which is controlled right here, is user determined and it may be set anywhere between 32 and 240 degrees Fahrenheit. Does conserve power by turning off the fan if the fluid falls below a determined shutoff temperature.This does install in the radiator inlet tube so that the probe itself remains positioned in the hose. It does include everything laid out here on the table.
This is the thermostat switch with the probe, has the thermostat mounting bracket and the mounting hardware has this roll of 16 feet of extra wire to make your electrical connections. All your electrical connectors and cable ties are included and a nice set of detailed instructions that'll describe and show how this installs. Few specs on this. The adjustable temperature range, again is 32 to 240 degrees Fahrenheit. Maximum capacity is 16 amps, but that should do it for the review on the Derale Adjustable Fan-Control Thermostat with Radiator Hose Probe..
Average Customer Rating: 4.3 out of 5 stars (6 Customer Reviews)
Automatically control your electric radiator fan with this adjustable, in-hose, thermostatic switch. Set the turn-on temperature anywhere between 32 and 240 degrees, and the power-saving shut-off falls just 10 degrees below.I've used this product before and it does exactly what I want it to do. I use it to tap into the ECU ground control for the hi speed fan relay coil. This along with a manual switch also tapped in, allows me to run the hi speed fan at the temps I want it to.
Great price and very fast shipping. I will be a customer again.
This fan controller works well. Only complaint is that the mounting bracket screws didn't fit through the holes in the bracket, I had to expand the holes larger to get them through. Aside from that minor inconvenience I'm pleased with the item's operation.
Very nice kit. Good heavy wiring and all the components needed to install it. Good directions. Could use some gradations around the adjuster to know exactly where the temperature is set, but the calculation isn't too hard.
A nicely packaged kit with all the electrical wiring hardware.
A nicely packaged kit with all the electrical wiring hardware.
Everything was perfect I'd give it 5 st ars
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.