Can the Brackets of the Wheel Masters Pin Box Level Be Installed To Inside of Level Bracket

Published 11/12/2015

Products Featured in This Question

5th Wheel Pin Box Mounting Bracket for Wheel Masters Level Master Trailer Bubble Level

(14)

$16.73

Wheel Masters Level Master Trailer Bubble Level - Aluminum

(200)

$44.10

Question:

I own an Open Range fifth wheel with a King Combo hitch. This hitch is unlike most fifth wheels in that it is square on the front where I would mount the level. It is also only 9inch wide, which is less than the width of the level. My question is this: can the two bracket pieces be mounted to the hitch reverse from what is shown in the video? That is making the mounting area wider than 9inch so the level can be mounted? hopefully not too confusing. Thanks

asked by: Rich R

Helpful Expert Reply:

Sounds like you are asking if the brackets part # WM6700BK could be mounted with the portion that attaches to the pin box to the inside of the level part # WM6700.

Basically you would just need to switch the left and right mounts so that the portion of the bracket that attaches to the pin box could then be then narrower than the actual level.

expert reply by: Jameson C