Towing Capacity for the 2004 Dodge Dakota Quad Cab with 4.7 Liter V8

Question

Question:

what is towing cap.?

asked by: Jerry I

0

Expert Reply:

For your quad cab 2004 Dodge Dakota with 4 wheel drive and 4.7 liter V8 the towing capacity would be 6,100 lbs.

The GCWR for your truck would be right at 10,500 lbs. This rating is the total weight of the truck and trailer combined.

expert reply by: Jameson C

0

Scott

6/23/2020

This is not completely accurate. The towing capacity is dependent on the axle ratio. If you have a 3.92 axle ratio then your towing capacity is 6500 lbs. If you have a 3.55 axle ratio then your towing capacity is 4200 lbs

Answer 1

Other than the 2022 Toyota Tundra and the 2019+ GMC Sierra 1500 Denali, I'm not aware of any other currently available composite bed trucks. None of our vendors yet offer a 5th wheel bracket/rail option for the 2022 Tundra, but Curt offers the…

view full answer...

Answer 2

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

view full answer...

Answer 3

As a rule, one hinge like the Replacement Entry Door Hinge for RV #LC198295 should be installed every 30 inches. So, if you have a 60" door, you'll need two hinges,

view full answer...

Answer 4

In order to confirm the correct replacement landing gear leg for your trailer you'll need to take a few measurements, the first simply being the length of the outer tube. Then, you'll need to measure the distance between the weld stops either…

view full answer...

Answer 5

The towing capacity of your 2004 Dodge Dakota is 3,400 to 4,650 lbs. If you were to install the Curt Class 3 Trailer Hitch Receiver #C13145 which has a Gross Trailer Weight of 5,000 lbs and a Tongue Weight of 500 lbs your Dakota would be the limiting…

view full answer...

Answer 6

The TremPro 644 Silicone Sealant part #0160297 is what we use for general roof repair and it will work great for you as well as it works on both aluminum and galvanized metal.

view full answer...

Answer 7

The Reese weight distribution system part #RE94FR is the best value for your Rockwood Geo 19FD and would be what I would go with if I were you. It's just as effective as the Fastway e2 part #FA94-00-0600 but at a much better price.

view full answer...

Answer 8

The biggest issue with a weight distribution hitch like the Fastway e2 #FA92-00-1200, which is likely what you've got on your trailer, is that the hitch head doesn't provide any friction or tension. Having a weight distribution hitch that…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Towing Capacity for the 2004 Dodge Dakota Quad Cab with 4.7 Liter V8

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching