bing tracking image
Customer Service My Orders
Q & A Icon

Brake Controller Install Harness Recommendation for a 2009 Ford F-53 Chassis Motorhome  

Updated 10/27/2015 | Published 10/26/2015

Question:

I have a 2009 Damon Challenger 371 on a 2008 Ford F53 chassis. I already have a Tekonsha Prodigy 2 brake controller from another vehicle that I would like to swap into the Damon. What harness do I need to connect them? does the Damon have a pre-wired plug under the dash for this? DO you know where this plug is? I believe I would also need the rear adapter 37185 or perhaps the C57674. Any advice / assistance you can provide would be appreciated. Thanks!

0

Expert Reply:

For the 1999-2011 F-53 chassis motorhomes there is a brake controller installation port behind the instrument cluster. We have heard it is fairly difficult to locate, but if you keep digging you should find a grey connector that would work.

The correct harness needed to install the P3 brake controller # 90885 would be the part # 3035-P.

For more info on this search the internet for the Ford document q-206.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for 3065-P
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>