Round LED Trailer Tail Lights to Replace Peterson Incandescent Lights
Updated 10/06/2015 | Published 10/05/2015 >
Products Featured in This Question
Question:
I hope you can answer a few questions for me. I am wanting to convert my 6 trailers from incandescent to LED, and currently have the Peterson style mounting brackets. What I had hoped for was to find an LED fixture of about 3 inches with 2 tapped studs out of the back and wires coming out of the fixture instead of the 3 prong plug typically found on LED fixtures, so that I could use the trailer as a ground as I have been. But it appears that a four inch fixture is the smallest available, correct? Is 4 inch minimum a law? Anyway, please let me know if what I am wanting is available. Thanks very much for your help.
asked by: Tony T
Expert Reply:
Three inches is small for a tail light. There aren't even any incandescent stop, tail, and turn lights as small as 3 inches. It looks like to get what you want you will need to got to a 4 inch light.
If you like the Peterson lights and need a flush mount that mounts in a grommet you could use # 435800. It does use the plug-in style connector but you would still hardwire all of the wires, including the grounds, to the trailer. This light includes the grommet and pigtail.
I have included links to this and other 4 inch diameter LED tail lights for you.
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Comprehensive Review: Peterson Trailer Tail Light
- Search Results: trailer lights
- Shop: Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens - Passenger Side
- Shop: Peterson Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens - Passenger Side
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Q&A: Looking For Replacement Shroud For Dometic 651816H751J0 AC Unit
- Q&A: Looking For Replacement Tail Lights For 2003 Ranger Bass Boat 519VX Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Trailer Lighting Requirements
- Article: Trailer Lights Not Working After Winter? Test Truck or Trailer
- Q&A: Will The New Replacement Command Center Hub for Curt RVi Series 4 Work on a Series 3
- Q&A: Inverter Replacement Recommendation for WFCO WF5110RS
- Q&A: Replacement Reverse Light for Ranger z521 Boat Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)



