Location Of Brake Controller Port On 2015 Toyota Tundra

Updated 10/06/2015 | Published 10/04/2015

Question:

Mt 2015 tundra has the tow haul button on the end of the gearshift. Where is the brake controller connector?

asked by: Jim

Expert Reply:

On your 2015 Tundra, the vehicle side connector is located behind an access panel located in the center of the dash, just to the right of the steering column. You can check out the attached photo that shows where this panel is located.

Using a trim panel puller, carefully pry the panel out and undo the locking tabs to remove the panel. You will find the mating connector behind this portion of your dashboard. I have attached a photo that shows what the connector will look like.

If you are installing a Tekonsha brake controller like the Prodigy P2, part # 90885, the correct plug-in adapter is part # 3031-P.

If you are planning on installing a brake controller manufactured by someone else, let me know and I will be glad to see if we have a plug-in adapter available.

expert reply by: Jeffrey L