Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 27" long x 11-1/4" tall. This sturdy steel fender has a slanted back, offering extra cargo clearance and making it great for your boat trailer. 16-Gauge cold-rolled steel is strong. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this single axle slant back steel trailer fender for a quantity of one. Now this is designed to cover one tire on the side of your single axle boat trailer. It'll basically act as a splash guard. It helps keep any road debris from hitting other vehicles and helps protect your trailer's cargo.
These slant back design fenders are usually used on boat trailers and when I say slant back design, I'm trying to show you if you look at it here, it's basically wider at the bottom than at the very top here. The reason they designed it that way is to leave enough room for your boat to come onto the trailer while still providing adequate coverage for your tire.If you look on the outer edge of this fender, let me just zoom in here, the outer edge has a nice finished one inch curved radius lip to it. The fender is a sturdy 16 gauge cold rolled steel construction, and it can be primed and then painted to provide even more resistance to corrosion or to match your trailer's paint finish. This is a weld-on or bolt-on installation. Now, if you do bolt it on, it does require mounting brackets.
Now, those we do sell separately. They're part number CE26061G-2. They're usually listed on this product page as a related product. This fender is made in the USA. Specs, it's for a quantity of one fender.
Application is a single axle trailer with 10 inch to 12 inch diameter wheels. As a general rule, when your trailer's loaded to its full capacity, there should be a minimum clearance of about three inches between the top of your tire on the trailer and the underside of your fender.Last thing I'm going to do is give you some dimensions. Weight on this is only about seven pounds. If we measure the length from this end to this end, it's going to be right at 27 inches long. Overall height from the bottom to the very top, right in the middle here, it's 11.5 inches tall.
Then we mentioned it being a slant back, so I want to give you the measurements at the bottom. Let me turn it this way and you'll be able to see right at the bottom is going to be right at about nine inches. Then at the very middle, the top here, it's going to be right about seven and three quarter inches. That should do it for the review on the single axle slant back steel trailer fender for a quantity of one.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
I totally rebuilt my trailer from the ground up new paint and new sideboards new coupler new bearings and of course new fenders from etrailer really finished it off! The fenders painted up like nothing and look great!
I am very happy with the product; easy to work with it; I modified it cut it to size to accommodated new 15" tires for my enclosed trailer.
Picture of the original trailers fender 13" (on the left side) side by side with F1075X32-1R fender modified
Thank you
Wow! etrailer has exceeded my expectations again. These fenders arrived in record time and were exactly what I needed to restore my old utility trailer that my father constructed in the 60's. After a rough fit I discovered that I needed to cut them to fit properly. No problem, with my jig saw and a metal blade they trimmed easily. Additional products were ordered for this restoration and all were perfect for the job.
Good job etrailer, I couldn't recommend you higher.
Appreciate the heavy gauge metal. The edges were easy to work with.
I was real happy with the service and free shipping for the fenders I ordered. I modified them to fit this unique trailer used to carry our Model Submarine on a float for Veterans and Holiday parades etc..
I used angle and made cuts in the fender inner side and then fitted the assembly to the trailer and tack welded the brackets. I then took the fenders off and painted them and finished welding the brackets. After painting and mounting the fenders we won't have spray on the Float or on the road.
These fenders are excellent. The stamping and finish is perfect. They arrived at my house well packaged and damage free. I bought these as an alternative to finding NOS fenders for a 1946 Bantam Jeep trailer I am restoring. They are 2 inches wider than the originals but that's a good thing since I can run more modern wheels and tires without them sticking out of the fenders. Otherwise they are exactly the same as the original fenders except stronger due to the lip on the body side of the fenders. I am very pleased with my purchase and the service I received from etrailer.
I was looking to make a custom rear fender for my 2017 Polaris Slingshot SL 3 wheeled roadster and came across the etrailer website. I looked at many different types and styles of fenders before I finally decided on this one. Judging by my preliminary test fitting, it looks like it will fit perfectly once I fabricate the mounting brackets.
I received my fender within a few days after placing my order and it arrived damaged free thanks to the large box it was packaged in. I will definitely be buying more fenders from etrailer in the future.
These fenders are very sturdy. I used them on a trailer I recently built. I mounted with 2 pieces of angle iron front and back. I am very satisfied.
The trailer fender worked great. The oem fender was a little bit shorter so I cut about 6 inches off of the ends and it worked fine to repair a customer's boat trailer after his axle came out from under the trailer.
Fast shipping
Great product. Priced right. Quick ship ping.
Are ok but I feel it should be wider for 14” tires. Wished I had ordered 15” fenders for my 14” mounted tires.
Received order quickly. Will have to modify fenders to fit my 1997 boat Trailer. Pleased with the ordering process.
Metal was thick enough to weld safely to the trailer frame and thicker angle iron. I did a crappy spray can paint job(just brake cleaned them before painting) and they are still looking great a year later.
Alex was extremely knowledgeable about their products, she was very pleasant and got me the fender I needed for my ezloader boat trailer after having a blow out. Shipping was lightning fast, ordered on Monday and received it on Wednesday. Would recommend etrailer to anyone that needs anyone of their products. Great Quality fender
It looks like it's a direct replacement for my damaged fender. However I thought it was strange to ship the fender across the country via USPS. My small town post office didn't know how to handle it.
Works great
good price good fast delivery
Great fit, great prive quick delivery, this mount is based on a previous customers pictures
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
3/11/2025
Hi George, thanks for including a photo with your feedback. Just out of curiosity, is this mounted onto a trike?