bing tracking image
  1. Brake Actuator
  2. Hydrastar
  3. Electric-Hydraulic Brake Actuator
  4. Drum Brakes
  5. Boat Trailer
  6. Travel Trailer
Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
Hydrastar

Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi

Part Number: HBA-10
In Stock
$1,110.73
Retail:$1,165.00
You Save: $54.27
Brake Actuator
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately. 1-800-940-8924 to order Hydrastar brake actuator part number HBA-10 or order online at etrailer.com. Free expert support on all Hydrastar products. Great prices and Fastest Shipping for Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi. Brake Actuator reviews from real customers.
  • All Info
  • Reviews (77)
  • Q & A (0)
  • Photos

Hydrastar Brake Actuator - HBA-10

Highlights

  • Faster Stops When You Need Them: Electric-over-hydraulic setup delivers instant braking as soon as you press your vehicle’s brakes.
  • Smooth, Controlled Braking: Proportional pressure valve keeps stops balanced and jerk-free on drum brakes.
  • Built to Last Around Water: Anodized aluminum housing resists corrosion for long-term use on boat or marine trailers.
  • No Parking Hassles in Reverse: Brakes can be activated or locked out manually for full control when backing up.
  • Reliable Performance for Heavy Loads: Rated at 1,000 psi for single- or tandem-axle trailers up to 7,000 lbs.
  • Simple Hookup and Maintenance: 12 V DC power, 3/16" hydraulic port, vented plate, and built-in bleeder screw for easy setup.
Made in USA

Features to know about

Faster, Smoother Stops: 1,000 psi Electric-Over-Hydraulic Power

This Hydrastar actuator brings the quick response of an electric brake controller to hydraulic drum brakes. With a maximum output pressure of 1,000 psi and 12V DC power, it applies your trailer brakes the instant you touch the pedal instead of waiting for surge pressure at the hitch. The electronic, proportional valve keeps braking smooth and even, matching the effort of your controller so there’s no lag or push from behind.

Confident Backing and Better Control: No Manual Lockout Needed

Because this system is electric over hydraulic, you can back up without fighting your brakes. There’s no coupler to pin or lock out—just back down the ramp or up a driveway and keep full control. You can even use the manual override on your brake controller to activate trailer braking whenever you need it, which makes tight spaces and steep grades easier to handle.

Built to Last: Anodized Aluminum with Vented End Plate

The actuator housing is extruded anodized aluminum that resists corrosion from water and road grime. A vented end plate releases heat, pressure, and moisture to protect the internal parts, so it can be mounted in enclosed spots where other actuators might overheat. Inside, weathertight seals keep everything clean for long-term reliability on single- or tandem-axle trailers up to 7,000 lbs with drum brakes.

Straightforward Installation: Frame-Mounted with Included Hardware

It mounts directly to your trailer frame using the supplied hardware and connects to your existing 3/16" hydraulic line port. The wiring is simple—black for 12-volt power, blue for the brake controller signal, yellow for the breakaway circuit, and white for ground. Pair it with a standard 5-amp-hour breakaway battery kit (sold separately), and you’re ready for dependable braking performance wherever you tow.

Specs

Application

  • Application: single- and tandem-axle trailers (up to 7,000 lbs) with drum brakes

Performance

  • Maximum output pressure: 1,000 psi
  • Power: 12V DC

Connections

  • Hydraulic port size: 3/16"

Dimensions

  • Dimensions: 11-3/4" long x 3" wide x 7-3/8" tall

Wire Configuration

  • Black: 12-volt power
  • Blue: brake controller
  • Yellow: breakaway
  • White: ground

Warranty

  • Actuator: 2 years
  • Brakes and components: 1 year

Note

  • Note: Do not power wash the Hydrastar actuator or take it through a commercial car wash. High-pressure water may damage the seals on the actuator.

Installation

  • Installation Diagram: Hydrastar electric over hydraulic brake actuator installation diagram showing mounting position, wiring connections, and hydraulic line hookup for trailer drum brake setup.

HBA-10 Cargo Towing Solutions (formerly Carlisle) Hydra Star Electric-Over-Hydraulic (EOH) Brake Actuator

Replaces Hydrastar HSV381-7065

Installation Details HBA-10 Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.8

77 reviews
Review sort icon
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.

by:

THE PRODUCT I NEEDED AT A GREAT PRICE WITH A FAST DELIVERY



by:



by:

Perfect! Exactly what we needed to complete the job.



by:

Service was exceptional as for the product is what is, replaced the same that was in service for 6 years, should have lasted a lot longer



by:

all worked out great



by:

Thank you for the prompt delivery, three days quicker than expected



by:

I was pleased with my purchase and the timely manner in which it arrived. The packaging was damaged so I was skeptical whether the product would be as well.



by:

SO FAR IS WORKING GOOD STOP TRAILER NICE AND SMOOTH.



by:

The product was exactly as picture, etrailer did an outstanding job expediting this order, got the product the next day .



by:

I’ve been installing these HBA - 10 actuators on new trailers for a year now and they have been working great.



by:

It works as it should. No problems so f ar.



by:

Received our order today. It was delivered quickly and in great condition. Obviously we haven't had a chance to install nor use it yet so I can't speak to the review of that. But I will say that Cailee and etrailer did a fantastic job of getting what we needed to us asap! Thank you Cailee!



by:

Night and day difference from the useless surge brakes on my boat trailer.



by:

awesome product, I have installed 4 more for customers,, works great, very easy to install and do away with surge brakes,, its a 5 out of 5 ,,, ill be buying more



by:

I just got it put on the trailer so really haven't had a chance to try it .
The part went on the 3 horse living quarters trailer which I hope to pull later today. The brakes activated properly, bleeding process was certainly a two man operation and took quite a bit of time.



by:

The controller is still working. It tends to run at a low rate even when we're not braking, but perhaps it's something with our pickup or trailer wiring.



by:

Work Great Fast Shipping

John B. profile picture

John B.

10/23/2013

Have Hydrastar HBA12 1200psiG7 on tandem boat trailer. Breakaway activates brakes well but brakes activated thru vehicle do not work.A check of power from vehicle to trailer indicates circuits are all good. Can hear contact noise from inside brake unit but pump doesnt start but thru breakaway activation the pump works well.Have been told the fault is in the Electronic Chip that activates the pump. Is this correct and if so can I purchase that part only? What part number do I order? Appreciate your reply. John B

Patrick B. profile picture

Patrick B.

10/29/2013

What brake controller do you have installed in the vehicle? Not all brake controllers will properly operate an electric over hydraulic actuator pump. Some require a different mode or setting to accomplish such. It also may be good to make sure the system is wired properly. Check out the wiring diagram towards the bottom of the page on the HBA-16 actuator.


by:

This company is excellent! They have things I didn’t
even know I needed. Quick turn around time. Couldn’t be easier to get lights, hitches, jacks, brake controls (electric or electric over hydraulic). Been using this company for years and never had a problem.



by:

I have a tandem axle dump trailer that came with factory hydraulic surge brakes. They worked sporatically at best, were very unpredictable, and eventually stopped working all together.
I installed the hba 10 as well as an electric breakaway switch and eliminated the surge hitch all together.
Works great. Far beyond my expectations.



by:

Great product. Low maintenance. Small enough to put in almost any location. I put mine in a side tool box just above my trailer axles. Breaks engage as soon as pedal is engaged.



by:

Still working as it should, no problems with the actuator. Completely satisfied! If only the rest of my braking system were as trouble free!

James profile picture

James

4/12/2019

I am happy with the actuator and how well it is working



by:

Very good product, it works well with my trailer. Much better than electric drum brakes. Only down fall is I found it is sensitive to voltage spikes. I had a faulty alternator and the control board in the unit burnt out. Somewhat disappointed that replacement parts were not available to repair my current unit. Had to replace that whole unit just for a small circuit board. Great unit otherwise as far as function.



by:

Been a year, haven't had one issues, very easy install. I went with the hydrastar unit so that i could utilize the brakes from a rear dana 60 axle, from a old service truck that i made into a trailer. The brakes function great. I recommend this unit to any one that is looking for a good solution to trailer braking using hydraulics, this system will also replace a surge brake system and operate much better. etrailer also had great follow up and customer care to see if I was satisfied with the unit which I am!



by:

Product came damaged.

Katrina B. profile picture

Katrina B.

5/11/2023

It seems that the manufacturer prefers to handle all warranties. Lets get you their information via email.



by:

I am more impressed with the service I received from both representatives, Thomas and Justin. You both went above what is considered customer service in this day and age and I appreciate it! As for the part...exact replacement and is working as expected.


25
25

See what our Experts say about this Hydrastar Brake Actuator

  • Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
    The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, # HA100400C. This unit connects to the air brakes on the truck and when the brakes are applied it sends an electric signal back to the trailer brakes. The other option, and what I would do, is to use an electric brake controller like # 90885. For either of these controllers, the red wire attaches...
    view full answer...
  • How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
    You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar units. If your trailer has drum brakes, you will want part # HBA-10. If your trailer has disc brakes, then you will want part # HBA16. I have also attached a link to all of our electric over hydraulic actuators for you to check out your options. The...
    view full answer...
  • Converting Military Trailer Air Over Hydraulic Drum Brakes to Electric Over Hydraulic
    You are correct, there are 4 electric over hydraulic braking systems, from 3 manufacturers, that can be used to eliminate the air over hydraulic actuator on your M200A1 trailer. These systems all require a breakaway system to meet DOT safety standards. I will detail each system for you so you can select the one that will work best for your truck and trailer setup. First, the Dexter Electric Over Hydraulic Brake Actuator, # K71-650, would be a good choice because it will work with the OEM...
    view full answer...
  • Parts Needed to Swap UFP A-70 Surge Coupler to Work W/ Electric-Over-Hydraulic Brakes
    Stan, so it sounds like you want to go from surge to electric over hydraulic braking. What you need to do then is get an actuator # HBA-10 for drum or # HBA16 for disc, a brake controller like the Tekonsha Prodigy P3 # 90195, and then finally lock out the coupler or replace it with a standard coupler like # DM15000-52. If there is anything else I'm missing or that you have questions with, feel free to come back and drop a comment and I'd be happy to help :)
    view full answer...
  • Recommended Hydraulic Brake Assemblies, Actuator, And Brake Lines For Dual Axle RV
    For your conversion to hydraulic brakes on your 7,000 lb dual axle RV, I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K # AKFBBRK-7. These assemblies are side specific and are labeled for you. These will work with your current hub and drum assemblies. For installation and adjustment, you will want the Brake Adjustment Spoon for Drum Brakes # W80630. If you need the mounting bolts for these assemblies, I recommend # BRKH12. If...
    view full answer...
  • Parts Needed to Convert Military Trailer M105A2 to Electric Brakes
    We've had this question before and we were able to determine that your M105A2 either uses a 5200 lb or 6000 lb axle so for hub drums you most likely will need the part # AKHD-655-6-K. This hub and drum comes with inner bearing part # 25580 and outer bearing part # 15123. It fits a 12 inch diameter brake assembly. You do want to check your existing bearings for their bearing numbers. There should be bearing numbers stamped on the side. If there is not numbers stamped on the side you can...
    view full answer...
    Image 1 for Image 2 for
  • Parts Needed To Convert An EZ Loader Boat Trailer From Surge To Electric Brakes
    Hi Cindy, Are you wanting to transition to electric drum brakes or would you just like to switch to an electric-over-hydraulic (EOH) setup that you'd be able to use a brake controller? If you want to switch to electric drum brakes you'll need to know the axle capacity and bearing/grease seal combination for your spindle. You'll need to switch to electric drum brake assemblies, use hub/drum assemblies, will need a 7-way cable # e99010 and junction box # e99009, breakaway battery and...
    view full answer...
  • Air Actuated Trailer Brake Controller Compatible With Electric Over Hydraulic Trailer Brake Actuator
    Yes, when you press your brake pedal for your air brakes on your truck it will tell your brake controller like the Hayes Air Actuated Trailer Brake Controller # HA100400C to activate the HydraStar Electric Over Hydraulic Actuator # HBA-10 on your trailer. You will need to confirm that your trailer brake controller is compatible with electric over hydraulic brakes like the Hayes unit is. To test your actuator you can pull the emergency break away cable to ensure that the actuator activates...
    view full answer...
  • Recommended Disc Brake Conversion Kit for a Tandem Axle Trailer w/ 3,500 lbs Axles
    Hey Vyacheslav, thanks for all the information! Your inner and outer bearings correspond to ones found on 3,500 lbs axles. I have all of the parts you'll need. However, all of our complete kits for 3,500 lbs axles come with an actuator so you'll need to purchase the hubs and lines separately. Here are the parts you'll need to convert your trailer's brakes to hydraulic disc brakes: DeeMaxx Disc Brake Kit item # DE66YR. This kit includes two preassembled hub-rotor kits with bearings that...
    view full answer...
  • Parts Needed to Convert 2003 Jayco Eagle Pop Up With Surge Brakes to Electric
    Hey Susan, to swap your surge brakes to electric over hydraulic, you're going to need to change out your actuator and add a proper brake controller. For an actuator I'd recommend going with the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10 if you have drums, or # HBA16 for discs. From here, you'll need a brake controller. I recommend checking out the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This brake controller will work great with electric brakes,...
    view full answer...
  • Could Trailer with Electric Over Hydraulic Brakes Have Trailer with Electric Brakes Connected
    So your electric over hydraulic brake actuator is receiving a standard brake controller output signal to tell it how to operate your EOH trailer brakes. So it would be possible that you could take this circuit (most likely blue wire) and extend it from where it connects to the actuator to the back of the first trailer so that you could then connect it to the electric brakes of your second trailer. You'd need 10 gauge wire like part # 10-1-1 (sold by foot) to get the circuit to the trailer...
    view full answer...
  • Replacement Electric Over Hydraulic Actuator for Drum Brakes
    Hey Doug! The best actuator for your boat trailer and truck is going to be the Hydrastar Electric Over Hydraulic Actuator item # HBA-10. This is specifically designed for drum brakes on both single and double axle trailers and has a maximum pressure of 1,000 psi. It is going to be compatible with the factory brake controller in your 2013 Ford F-150. I assume that's what you mean by factory actuator.
    view full answer...
  • Parts Needed to Swap Surge Brakes With Electric Brakes On a 16' Car Hauler Trailer
    In order to swap your surge brakes to electric brakes you're going to need to first swap out the actuator with the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10. The next thing you'll need is new brake assemblies, if your drums are in good shape you can leave those on there but you're going to need brake kits for all four of your wheels using # 23-26 for the left side and # 23-27 for the right side. Next, you're going to need a brake controller. I personally like...
    view full answer...
  • Is the HBA-CAM Adapter Needed for a 2023 Ford F-350
    Assuming you're using a factory brake controller, you are likely going to need the # HBA-CAM to use your Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10 with your 2023 Ford F-350. Hydrastar was unable to verify this 100 percent, so they recommend that you take your trailer to a vacant parking lot or similar place to test it out.
    view full answer...
  • PSI Rating for Dexter Hydraulic Trailer Brakes
    Hey Bik; since the Dexter Hydraulic Trailer Brakes # 23-336-337 are under 8k the correct psi is 1,000 lbs. Are you looking for an electric over hydraulic actuator? If so, you can use the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10. If the brakes were rated for an 8k axle or higher you would need a 1,200 psi actuator like the # HBA-12 instead.
    view full answer...
  • Parts Needed To Switch From Surge Brakes To An Electric-Over-Hydraulic Actuator
    Hey Tyler, You can definitely swap out the surge brake actuator for an electric-over-hydraulic actuator with minimal alteration to your setup. Disc and drum assemblies run at different psi levels so you'll need the Hydrastar # HBA-10 if you have drum brakes or the # HBA16 if you have disc brake assemblies. You can lockout the actuator keep using the coupler if you want or swap it for a standard coupler if you'd like. If you don't have a junction box, 7-way, and breakaway battery/switch...
    view full answer...
  • Parts Needed To Go From Surge Brakes To Electric Over Hydraulic Drum Brakes
    Hey Leslie, You can definitely convert that trailer to electric drum brakes with 2 major components, a brake controller and electric over hydraulic actuator. I recommend the Hydrastar # HBA-10 for electric drum brakes as a replacement. The brake controller is dependent on your tow vehicle, without knowing that I don't know which specific plug in adapter that will work for you. I do recommend the Tekonsha Prodigy P3, # 90195, for almost all vehicles. It will come down to what vehicle you...
    view full answer...
  • Which is Better Dexter or Hydrastar Electric Over Hydraulic Trailer Brake Actuators
    With our experiences installing and using the various electric over hydraulic actuators out there the consensus is that the Hydrastar actuators have the quickest response time and are the most reliable. All of our installers when asked will say that the Hydrastar is the way to go. While that's not technical info like you mentioned it's real world experience that you'd be able relate better to. So the # HBA-10 is for up to two axle trailers that are rated for up to 7,000 lb axles (each)....
    view full answer...
  • How to Find Correct Replacement Hydraulic Surge Brake Actuator for Trailer
    In order to find out what you need for a replacement actuator you will want to start by finding out what kind of brakes you have. A different brake actuator is needed if you have drum brakes or disc brakes. You will also want to choose a replacement that meets or exceeds the weight of your trailer and probably one that fits the same size ball your current coupler has. Occasionally you may be able to pull a part number off of your current actuator to see if a direct replacement is available. Assuming...
    view full answer...
  • Comparing the HydraStar Hydraulic Actuator and the Titan BrakeRite Hydraulic Actuator
    It looks like you have certainly done your research in regards to the HydraStar Electric Over Hydraulic Actuator and the Titan BrakeRite EHB Electric-Hydraulic Actuator. In regards to repose time, this goes to the Titan BrakeRite EHB with a response time of .3 seconds whereas the HydraStar Electric Over Hydraulic Actuator has a response time of .8 seconds. This is due to the five vs three piston pumps that each respective units use. In regards to the Titan BrakeRite EHB Electric-Hydraulic...
    view full answer...
  • Selecting the Correct Hydrastar EOH Actuator When Converting Triple Axle Surge Disc Brakes
    As you are converting your surge trailer with disc brakes you will want to go with the Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness # HS381-9067. This kit will include the junction box to run your wiring, a breakaway kit and the correct actuator. The 1,000psi Hydrastar # HBA-10 is for single or tandem axle trailers up to 7,000lbs GVWR with drum brakes. The 1,200psi Hydrastar # HBA-12 is for trailers using drum brakes over 8,000lbs GVWR with up to...
    view full answer...
  • Recommended Universal Fit No Splice Wiring Harness For Trailer Connector
    For your application, to add electric trailer brakes to your system without needing to splice into any factory wires, you could use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit, # 119250KIT. These Zero-contact interface senors idetify the current flowing through each wire by simply clamping around it. It has a circuit protecting module to protect your vehicle wiring and connects directly to the battery for power. This harness...
    view full answer...
  • Can Air Over Hydraulic Trailer Brakes be Converted to Electric Over Hydraulic on Military Trailer
    Since the braking power is still hydraulic, you should have no issues converting from a vacuum over hydraulic system to an electric over hydraulic system. The electric over hydraulic actuator will take the place of the vacuum that pressurized the existing brakes. If your trailer has disc brakes, the # HBA16 actuator that you referenced is a great choice. If your trailer has drum brakes, you will want the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10. Often, trailers...
    view full answer...
  • Parts Needed To Convert Dexter 10000lb Axles To Electric Over Hydraulic Trailer Brakes
    I would be happy to recommend everything you will need to convert your Dexter 10000lb axles to electric over hydraulic drum brakes. Starting with the brakes you will need the Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K # 23-410-411. If your current mounting hardware is in bad shape you can use # BRKH122510 for new hardware. For brake lines I recommend the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line #...
    view full answer...


< Previous
123. . .7




Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Raymond P
Written by:
Raymond P
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Michael B
Updated by:
Michael B
Employee Manda E
Updated by:
Manda E

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924