Electric Drum Brake Recommendation for a 2002 Shorelandr Boat Trailer
Published 08/28/2015
Products Featured in This Question
Question:
I have a 2002 Shorelandr boat trailer that had hydraulic disc brakes. The specs are hub: 1-3/8inch x 1-1/16, bolt pattern 5 on 4.5inch and 3,000lb capacity. I would like to change this to a full electric brake setup and was looking at your part number 23-468 and 23-469 plus the drum assembly AKHD-545-35-EZ-K as the replacements. Will these work?
asked by: Chuck
Expert Reply:
Based on the dimensions you listed you have a number 84 spindle which the hub you referenced part # AKHD-545-35-EZ-K would fit and has the same bolt pattern as what you have as well.
The brake assemblies you referenced # 23-468 and # 23-469 would work well then.
Since this is a boat trailer I would recommend you unplug your trailer wiring when you back the trailer in water.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: akhd~655~35~k
- Search Results: grease
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacing Hydraulic Surge Trailer Brakes with Electric Drum Brakes
- Q&A: Replacement Electric Brake and Hub/Drum Assemblies for Use with Al-Ko 2800-lb Axle
- Q&A: Trailer Hub/Drum and Brake Assemblies to Fit in Place of Dexter 3,500 lb Axle Idler Hub
- Q&A: What Size Brake Assembly Does 3,500 lb Axle Take and What Bearing Numbers
- Q&A: Hub and Drum and Brake Assemblies Rated for 3,500 lbs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)