Could Someone Drink Water from the Camco Water Hose Brass Elbow

Question

Question:

Is this faucet drinking water safe? I know a lot of metal parts made in China contain lead. Can you find out if this part contains any lead or other toxic materials since I will use it for drinking water.

asked by: Valerie

0

Expert Reply:

If you are okay with drinking from a garden hose then the Camco Water Hose Brass Elbow # CAM22605 that you referenced would work well for you. It's made of the same material (brass), as the fittings of a garden hose so you would be just fine drinking out of it.

expert reply by: Jameson C

0

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Answer 8

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 9

Hello Steven, You will want to use a 3 1/2" bit as you need a 3 1/2" hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1320. I attached an image where it goes over the size…

view full answer...

Answer 10

Hey Sean, welcome back! We do have a video showing the B&W Turnoverball #BWGNRK1320 being installed on a 2022 Ram 3500. I have provided a link to the video below. We don't have any videos showing how to remove the factory puck system though,…

view full answer...

Answer 11

Hey Kenneth, the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3050 that you referenced requires a minimum recessed box dimension of 18 inch by 18 inch and has a max recessed box depth of 4 inches. What are the…

view full answer...

Could Someone Drink Water from the Camco Water Hose Brass Elbow

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching