How to Add Brakes to a Trailer that Has Idler Hubs
Updated 07/28/2015 | Published 07/27/2015
Question:
Have MagicTilt double axle trailer. Each axle 1500KG /3300lbs. 25/65/10 tires with 4 1/4inch bolt centers. Need brakes for one axle for assist. Can you help??? Thanks in advance
asked by: Gary T
Expert Reply:
Sounds like you are looking to upgrade a trailer from having idler hubs to one that has brakes. There are several things to consider and determine to do this. If you check out the FAQ article I attached you will see exactly how to add brakes to a trailer that didn't have any.
I attached articles. One for adding electric brakes and one for adding hydraulic brakes.
You will need to remove your hubs to either get the bearing numbers or spindle dimensions so that you can determine what hubs would fit your spindle. They aren't all the same.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
- Shop: Trailer Wiring
- Shop: Brake Controller
- Video: Ultimate Overview of the Trailer Axle w/ Electric Brakes
- Video: etrailer Electric Trailer Brakes Review
- Video: Let’s Check Out the Curt Universal Installation Kit for Trailer Brake Controller
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Article: Trailer Wiring Diagrams
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Can Velit Diesel RV Heater Heat 288 sq ft Snowmobile Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can I Get MORryde Suspension Upgrade Kit MR86ZR With Two Extra Sets Of Shackle Straps?
- Q&A: Initial Adjustment Of Self-Adjusting Electric Brakes On Trailer
- Q&A: Replacement Dexter Brake Assemblies for 023-027-00 and 023-026-00
- Q&A: Which WFCO Replacement Converter to Allow Charging of Lithium Battery
- Q&A: Recommended Replacement Brake Rotor For Demco Kar Kaddy Replacement Hub
- Q&A: Which Size MORryde Suspension Upgrade Kit For Trailer With 2-1/2" Shackles
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings