Brake Controller Recommendation for a 2004 Ford F-350 Diesel

Question

Question:

i need a Brake Controller for my 2004 Ford F-350 with 6.0 Diesel Engine. What one would you recommend?

asked by: Tom B

1

Helpful Expert Reply:

For your 2004 Ford F-350 diesel I recommend the P2 # 90885 with wiring harness # 3035-P. The P2 is one of our most popular brake controllers of all time because it is easy to set up and use and it is reliable.

This is a proportional controller that will apply the trailer brakes in proportion to how hard or soft the vehicle is braking. This reduces wear and tear on the trailer and vehicle brakes and is the safest way to stop.

I have linked a video showing installation for you.

expert reply by: Michael H

1

Answer 1

We have the exact hitch you need for your motorhome on a 1999 Ford E-350 Super Duty chassis, the Curt Trailer Hitch Receiver #14053. This has the 10,000 lb towing capacity and 1,000 lb tongue weight capacity you wanted (the most available), and it…

view full answer...

Answer 2

We do have some universal weld-on trailer hitch receivers that will have the capacity you need on your Class C Thor Chateau. If the RV's frame is 44 inches or less then you can use the Draw-Tite Ultra Frame #41990-07. If you need a wider hitch we…

view full answer...

Answer 3

From your photo, it looks like you have a Ford E-350 with a cutaway chassis, and there is a heavy-duty hitch that can be bolted on, though you will need to be sure that the bolt holes where the hitch fits are exactly 38-5/8 inches from frame to…

view full answer...

Answer 4

In order to replace the trailer hitch on a motorhome you will need to go with a universal hitch as they do not offer bolt-on options for this. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-07 or part #41990-16…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

Brake controllers like the #C49UR Curt Assure aren't a vehicle-specific item. You can install a brake controller on just about any vehicle. What the installation will involve will depend on whether your E350 is equipped with a trailer connector…

view full answer...

Answer 7

So you'd have to change out everything, including the brake mounting flange, as the 6-bolt is simply not used anymore. There isn't a direct replacement from Dexter, so you'd need a 5-bolt brake mounting flange welded on (assuming you have…

view full answer...

Answer 8

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 9

On your 2004 Ford F-350 the factory port to plug in a brake controller is located near the center console to the right of the steering column. I have linked a video that shows how to access it.

view full answer...

Answer 10

The correct size nuts for the brake mounting flange bolts you have on your trailer is going to depend on which bolts you have. There is not really a standard thread pitch for braking assemblies so it will be best to replace the nuts and bolts with…

view full answer...

Answer 11

Yes, the mounting brackets included with the DeeMaxx Disc Brake Kit #DE72FR are also stainless steel.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Brake Controller Recommendation for a 2004 Ford F-350 Diesel

Featured Help Information

Miscellaneous Media

Continue Researching