Safety Chain Hook Recommendation for a Hitch with Large Safety Chain Hoops
Updated 05/11/2015 | Published 05/09/2015
Products Featured in This Question
Question:
I need 2 quick links that have at least a 1/2 inch opening and an inside diameter of 1 inch to hook my safety chain snap hooks into because the snap hooks are too small to connect to the hitch see photos. Are these links big enough?
asked by: Ken
0
Expert Reply:
Due to the thickness of the safety chain loops on your hitch your best option would be to go with a hook and keeper setup like the part # 1483-535-04. I attached a picture that shows the size of the opening on the hook.
For just the hook you would want the part # 6495-401-04.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Curt Threaded Quick Link - 1/2" Diameter - 3,300 lbs
- Accessories and Parts
- Safety Cables
- Tow Bar
- Trailer Safety Chains
- Safety Cable Parts
- Safety Chain Parts
- 1/2 Inch Diameter
- Quick Links
- CURT
more information >
Continue Researching
- Q&A: Can Quick Links be Used to Attach Safety Chains to Trailer
- Q&A: Brakes for Dexter 008-395-80 7,200 lb Hub and Drum Assembly
- Q&A: Looking For Replacement Bearings And Hub Kit For 2017 Airstream Flying Cloud
- Q&A: Quick Link Availability that has 10k Capacity for Use with Safety Chains
- Q&A: Does Furrion Vision S+ Have to Use Included Power Cable for Monitor
- Q&A: Does Black Wire on 7-Way Go To 12V Power
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Will SnapPad Mini Jack Pads SN39FR Fit A 2025 Trade Wind 23 FBT With 5-1/2" Square Jack Feet?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Sway Control Hitch is Right For Your Trailer?