What to Do When Safety Chain Hooks Wont Fit Holes in Trailer Hitch

Updated 01/07/2020 | Published 01/06/2020

Products Featured in This Question

Curt S-Hook with Wire Keeper for Safety Chains and Cables - 7/16" - 5,000 lbs

(23)

$5.22

Curt Threaded Quick Link - 1/2" Diameter - 3,300 lbs

(46)

$9.25

Question:

my safety hooks on my trailer will not go on hitch and they have a 1 inch opening

asked by: Philip L

Expert Reply:

In this situation, most folks either replace the safety chains, using a hook that will fit. Another option would be to use a quick link, like # C82932. Attach the quick link to the safety chain hole in the hitch, then attach the safety chain hook to the quick link. The exact link or replacement safety chain you need will depend on the weight of the trailer. You'll want to choose chains or links with a capacity equal to or greater than the weight of your trailer.

expert reply by: Mike L