Is a Double Lip Seal Included with Trailer Hub and Drum Assembly - 3,500-lb Axles - 6 on 5-1/2
Updated 04/27/2015 | Published 04/25/2015
Question:
What grease seals should I order for this product? I would like to order double lipped seals. This product is installed on a timbren system. Thank you.
asked by: Ryan C
0
Expert Reply:
Hub and drum assembly # 84656UC3 comes with the correct seal so you do not have to order one. The included seal is a double-lip seal.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Can Lippert ABS 12" Brakes And Hubs Be Used On Equipment Hauler Trailer With Standard 12" Brakes 7K?
- Q&A: Disc Brakes for Boat Trailer With 5-Bolt Brake Flange and 6 on 5-1/2 Bolt Pattern
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Q&A: How to Determine if a Gooseneck Trailer and Truck will have Clearance to Make 90 Degree Turns
- Q&A: Replacement Hub/Drum Brake Assemblies for B44EA-22 BD3-6553S
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Installation of Lippert Flexguard RV Slide-Out Kit Hardware
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing