Aero 6000 Master Cylinder Replacement for Use with Disc Brakes

Question

Question:

will this actuator work with disc brakes. what actuator should i use, 3500# pontoon brakes one axle. thanks Aero 6000

asked by: Doug H

0

Expert Reply:

The Replacement Master Cylinder Assembly # T4395100 that you referenced is only designed to work with drum brakes.

For an Aero 6000 master cylinder kit the part # T4714200042 will work with disc brakes but you would need to reuse the other parts.

expert reply by: Jameson C

0

Answer 1

For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…

view full answer...

Answer 2

From the research I did the Kodiak 225 calipers like the part #KDBC225DAC that you referenced are an exact replacement for the Mastercraft setup you currently have.

view full answer...

Answer 3

I do have a full replacement for you but we do not offer replacement parts for the Reliable ACT-7.5K Brake Actuator unfortunately. For a full replacement, the best option we have for you is the Swing-Away Actuator w/ Electric Lockout part #T4839100…

view full answer...

Answer 4

Hey, Hunter. It looks like you have a Reliable ACT-7.5K surge brake actuator. We don't carry their products and from what I can find on various forums and groups online, there aren't any replacement parts available anymore. I know this…

view full answer...

Answer 5

First, thank you very much for your repeat business and kind words. The Yates Keel Roller #YR10000 referenced in your question is exactly what you need to replace the rollers on your boat trailer. I actually went out to our warehouse to take a look…

view full answer...

Answer 6

We do have a potential solution for you. Unfortunately, the swing away actuators like the one on your 2005 Mastercraft trailer have been discontinued, so I am afraid there is no direct replacement, or anything that will fit inside the current swing…

view full answer...

Answer 7

We do have replacement parts for disc brake actuators yes, however I would need to know exactly what brake actuator you have in order to confirm fit. I don't have any parts breakdown for your trailer if that is what you were hoping for. The…

view full answer...

Answer 8

Your Titan Aero 6000 will use master cylinder cap #T4480701. There are a few different caps used on various Titan actuators but yours does use this one.

view full answer...

Answer 9

The actuator that you have referenced, #T47154007K, does not have a reverse lockout. However, if you were to add one using #T4748800, it works by blocking the flow of fluid back to the brakes when the tow vehicle is placed in reverse. There is no…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Aero 6000 Master Cylinder Replacement for Use with Disc Brakes

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching