Will Curt Hitch # C15300 Fit 1979 Ford F-150 Long Bed with Standard or Step Bumper

Updated 04/17/2020 | Published 02/28/2015

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

(539)

$267.19

etrailer Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs

(1375)

$130.57

Question:

hi, I would like to know if your hitch c15300 will fit my truck and what tow kit would you recommend, it seems my frame is 37.5-inches wide , thanks

asked by: Ismael S

Helpful Expert Reply:

Yes, the Curt Class V trailer hitch you referenced, part # C15300, is a confirmed fit for your 1979 Ford F-150 long bed with standard or step bumper and 37-1/2-inch wide frame. Installation will require some drilling and temporary removal of the spare tire. An install video is linked for you.

For a wiring harness you can use Draw-Tite # 18252 which provide a 4-pole flat trailer connector for your trailer lights.

A great option in a ball mount kit is item # EBMK2416 which includes a ball mount with 3-inch rise or 4-inch drop, two hitch balls, a pin and clip, all together in a handy tote bag. Please see the inked video.

expert reply by: Adam R

James K.

4/16/2020

i just purchased a f 150 4x4 my title says it is a 1997 inside the door where sticker is it says date of manufacture is 12/1996 trying to order the right receiver hitch went under truck no pre drilled holes in frame my measurements outside to outside of frame is 37 inches will the curt part # C15300 work and or curt part # 14001 thank you for your help want to order ASAP i also need to order wiring kit to make it a 7 way there is no type of trailer wiring on vehicle now

Chris R.

4/17/2020

I linked our full selection below of trailer hitches that are designed to fit your 1997 F-150 (there are quite a few). The Curt units you mentioned won't work, as they're designed for older F-150 models. The Curt # C14355 is a confirmed fit but it does utilize existing holes in the frame rails - are you saying that there are no holes at all on your frame? To add a 7-Way you'll need to start with the Curt 4-Way Harness # C56031 and then upgrade it using the Wiring Kit # ETBC7.

Helpful Links

hitch-1997_ford_f-150+and+f-250+light+duty.htm?style=standard+bed+models