Single Ball Recommendation for a Rapid Hitch Adjustable Ball Mount # AM3451

Question

Question:

I recently purchased the Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Chrome Balls - 10inch Drop, 11inch Rise. My issue now is that with my trailer at level, the double ball attachment gives me only about 8 inches ground clearance empty, and with slope on my driveway, and possibly others, it ped to about 2 inches clearance empty. Do you have a single ball setup, 2 5/16? This will give me another 2 plus inches clearance. Thanks,

asked by: Wil F

0

Expert Reply:

I have a perfect solution for you. You will want the Rapid Hitch Ball, part # AM3454. This will replace the dual ball set of your # AM3413 with just a single 2-5/16 inch hitch ball.

This way you will be able to keep your ball mount, use it with as much drop as you need, and won't have your ground clearance reduces as much.

expert reply by: Jameson C

0

Answer 1

We do carry a single 2-5/16" ball you can use with your #AM3414. The Rapid Hitch Ball with 2-5/16" Diameter #AM3454 will replace your current ball combo so you can tow your trailer. If you would prefer to keep a 2" on there with it we…

view full answer...

Answer 2

The Rapid Hitch Ball #AM3454 you ordered does indeed have a 12,500-lb weight capacity. This is a 2-5/16 inch hitch ball and is designed to work with Rapid Hitch ball mounts.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 11

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 12

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Single Ball Recommendation for a Rapid Hitch Adjustable Ball Mount # AM3451

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching