Weight Capacity Of Rapid Hitch Ball # AM3454

Question

Question:

Please make sure my trailer ball is 12,500 pound towing capacity. I have a 10,000 pound ball now and need more capacity.

asked by: Dennis H

0

Expert Reply:

The Rapid Hitch Ball # AM3454 you ordered does indeed have a 12,500-lb weight capacity.

This is a 2-5/16 inch hitch ball and is designed to work with Rapid Hitch ball mounts.

expert reply by: Jeffrey L

0

Answer 1

I have a perfect solution for you. You will want the Rapid Hitch Ball, part #AM3454. This will replace the dual ball set of your #AM3413 with just a single 2-5/16 inch hitch ball. This way you will be able to keep your ball mount, use it with as much…

view full answer...

Answer 2

The only greaseless hitch balls that are available are from Andersen and do require the Rapid Hitch Adjustable Ball Mounts, which come with greaseless hitch balls. There are no individual greaseless hitch balls that can be had separately. There are a…

view full answer...

Answer 3

We do carry a single 2-5/16" ball you can use with your #AM3414. The Rapid Hitch Ball with 2-5/16" Diameter #AM3454 will replace your current ball combo so you can tow your trailer. If you would prefer to keep a 2" on there with it we…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 10

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 11

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 12

Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…

view full answer...

Weight Capacity Of Rapid Hitch Ball # AM3454

Product Page this Question was Asked From

Continue Researching