Quick Link Recommendation for Use with the Safety Chain part # 2118-605-04

Question

Question:

These are 5k lbs rated. What quick link do you recommend to attach these to my trailer that has welded on Brophy brackets. Any others suggestions appreciated.

asked by: Kent

0

Expert Reply:

For a quick link to go with the Safety Chain part # 2118-605-04 that you referenced I would recommend the part # 6590-044-04, these have a 2,200 lb capacity. If you need more capacity go with the # C81277 as it has a 5k capacity.

expert reply by: Jameson C

0

Answer 1

Yes, if you wanted to weld on the Demco coupler part #DM37ZR instead of bolting it on you certainly could. This is powdercoated though so you will need to remove the powdercoating first. For a similar coupler that was designed to be welded on and…

view full answer...

Answer 2

It sounds like you might be looking for a trailer coupler repair kit for your trailer and if that's the case I do have some options but you're going to need to replace the entire coupler as they don't offer repair kits for the vast…

view full answer...

Answer 3

Hey Mark, so the CE Smith chain part #CES42QR has a diameter of 1/4 inch which means the inside width of the chain link is .43 inch which is the max diameter bolt that could pass through it.

view full answer...

Answer 4

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 5

While we do not carry trailer frames we do carry all the other parts you are going to need to build your tear trailer. I have compiled a list of parts that you can use to build a 3,500lb GVWR Trailer. Trailer Axle with Idler Hubs #e72GR Single-Axle…

view full answer...

Answer 6

Hey Mike, congrats on the new SUV. For cable style chains that fit 225/55 R18 tires you can use the Glacier Cable Tire Chains item #PW1042. The best tire chains for your 2025 Subaru Forester are going to be the Titan Chain Snow Tire Chains item…

view full answer...

Answer 7

Hey Joe, that's a great question but the 7,600 lb capacity for the CE Smith Safety Chains is for the pair and not individually. How much capacity are you needing?

view full answer...

Answer 8

To extend the field of view and help you keep a closer eye on the trailer, I suggest the K-Source Universal Towing Mirrors, #KS3891-2. The extra-large, universal towing mirrors clip over your existing side mirrors providing an extended rear view. The…

view full answer...

Answer 9

If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part #BWPMHD14005 may work well for you. The mounting plate features 7 holes on each side of the plate that are spaced 1-3/4 inches…

view full answer...

Answer 10

Hi Mary, There can be differences in the way components under the vehicle are ran that can change how a trailer hitch will need to be shaped to fit depending on the model type. I spoke with EcoHitch and they stated that they haven't tested the…

view full answer...

Quick Link Recommendation for Use with the Safety Chain part # 2118-605-04

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching