Does the # RM-910003-40 Bushing Kit for Roadmaster Sterling Tow Bar Include Parts for Both Arms

Question

Question:

Is this kit for both arms? It looks like it... Thanks

asked by: Jack

1

Helpful Expert Reply:

The Roadmaster # RM-910003-40 Inner Arm Bushing Kit for Sterling Tow Bars you referenced does include replacement bushings for both arms.

expert reply by: Mike L

1

Answer 1

Hey Roberto! 2018 was a split model year for the Wrangler so it is broken up into JK and JL. For example, If you have a standard bumper and it is a JK you would need the Roadmaster Direct-Connect Base Plate Kit #RM-521448-5. If you have a JL then it…

view full answer...

Answer 2

I spoke with my contact at Roadmaster about how to find the serial number to get the proper adapter to use with the Blue Ox base plates. You will need to spread the 2 arms apart on the tow bar and then look for the sticker where the two arms come…

view full answer...

Answer 3

Hey Jeff, thanks for reaching out, and thanks for attaching that photo - that makes this easy! I went and grabbed one of the 068-6 Road Master Dual Receiver Hitches #RM48BQ from our warehouse and got all the measurements you were wanting. I edited…

view full answer...

Answer 4

Yes, the Replacement Roadmaster Sterling Towbar Shank Assembly #910019-40 is a fit for all of the Roadmaster Sterling models. The current one they have active is the 8K #RM-576 but this same shank/stinger was used on the following discontinued models…

view full answer...

Answer 5

Over time the AutowLock buttons of the Roadmaster Falcon 2 Tow Bar #RM-520 can wear out and need to be replaced. The good news is that we carry a repair kit for this to get it back to normal. For that you would need the part #RM-910003-60.

view full answer...

Answer 6

In order to replace the bushing on your Sterling Tow Bar with a new Split Nylatron Bushing #RM-200029-00 you'll need to remove the 3/4" lock nut to remove the knuckle and slide the shaft out. From there you'll use a flat head screwdriver…

view full answer...

Answer 7

Hey David, it sounds like what you are looking for is the Complete Repair Kit for the Roadmaster Sterling Tow Bar part #RM-910003-30 which comes with the bolts and nuts you mentioned as well as a few other components. How many miles do you think you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Does the # RM-910003-40 Bushing Kit for Roadmaster Sterling Tow Bar Include Parts for Both Arms

Product Page this Question was Asked From

Continue Researching