See what our Experts say about this Voyager Accessories and Parts

• Question About a Product
  Hi Larry, Yes, Voyager has a Universal Monitor Mount that's 4" tall # VOSHD4MNT and 6" tall # VOSHD6MNT. These would screw into the back of the monitor and the base could either be screwed down to the dash or you could use some double-sided 3M tape to secure it.
  view full answer...
• Troubleshooting WiSight Camera Not Paired to Monitor
  Here's the pairing process for the WiSight camera kit for you to try: PAIRING PROCESS This system contains an Auto-Pairing function. If your monitor is not receiving a signal from the camera; the two may not be paired correctly. 1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance lights turned off). 2. Press the SEL/PAIR button on the front of the monitor expected mode & select the appropriate AV source. 3. Press...
  view full answer...
• Replacement Monitor for a Voyager WiSight 2.0 Wireless RV Backup Camera System
  Hey Jane, congrats on the new trailer. We do have a couple of monitors that will work with the Voyager WiSight 2.0 backup camera systems. I have listed them below: 7" Screen Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor item # ASA27FR. 4.3" Screen Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor item # ASA87FR. Please note, if you have the 1st generation WiSight system I do not have a replacement monitor. The Voyager system will not interfere with...
  view full answer...
• Options For Powering The Voyager Monitor In A Truck Without A 12v outlet
  I do have a potential solution for you, but voyager does not make any kind of adapter for the # ASA87FR monitor. What we can offer your is an auxiliary 12v outlet kit # RM-9332. This includes 5' of wire that you can run straight to the battery. These kits are a very easy add on and we use these for a wide variety of applications. I have linked our install video below if you want to take a look.
  view full answer...
• Ball Joint Diameter for Voyager WiSight 2.0 Wireless Monitor
  The ball joint that comes with the suction cup mount for the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA87FR has a 3/4" diameter according to my contact at ASA Electronics.
  view full answer...
  
• Solution for Replacement Monitor For ASA WVCMS130AP Camera
  The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor - 4.3" Screen # ASA87FR is only compatible with 2.0 systems. Unfortunately, your WVCMS130AP is a first generation product so there are no replacement parts available. The only option will be to completely replace your system. You can use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # ASA84YR or the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision...
  view full answer...
• Can Voyager WiSight 2.0 Monitor be Used in Multiple RVs With WiSight 2.0 Cameras
  Good question, so I reached out to the manufacturer, Voyager, who said yes, you can use the monitor to connect to any RV that uses the WiSight 2.0 camera WVSXC150. So the correct part number for the WiSight 2.0 monitor is the following: - Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA87FR
  view full answer...
• Troubleshooting No Power To Screen On a Voyager WiSight 2.0 Wireless Camera System
  I just want to verify you have checked there is power at the connector going into the screen on your Voyager WiSight 2.0 Wireless Backup Camera System # ASA37YR. If you are only checking power at the 12 volt accessory plug you may have either a bad fuse inside the 12 volt plug on the harness or a damaged connector. With power going into the monitor and still no power to the screen the monitor will be damaged internally. In that instance you will need a replacement 7" Monitor # ASA27FR...
  view full answer...
• Can the Replacement Voyager WiSight 2.0 Wireless RV Camera Be Used With a USB-C
  The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA87FR is actually not designed to be used with a USB-C, it's only going to work with a cigarette lighter port, unfortunately.
  view full answer...
• Checking Replacement Back-Up Camera Compatibility for a 2018 Lance 975 Truck Camper
  The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA87FR will work with the factory back-up camera on your 2018 Lance truck camper, if the factory camera is a Voyager WiSight 2.0 camera. Unfortunately, we do not have anything that tells us the camera used from your camper information. If you have a Furrion back-up camera, we also have a monitor for that. - Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR If you are unsure of what...
  view full answer...
• Can the 7 Voyager WiSight Monitor Be Swapped With the 4.3 Monitor
  If your original monitor was in fact the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA27FR then yes you can use the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA87FR as a replacement. If this is not your exact monitor, then you'd just have to let me know a little bit more info on what cameras you have so I can see what options we have for you.
  view full answer...
• Replacement RV Camera Monitor For Prewired 2020 Jayco Eagle Fifth Wheel
  Most likely your 2020 Jayco Eagle 5th Wheel trailer is prewired with a Furrion system which has replacement monitors in three sizes: 4.3" # FR77FR, 5" # FR97FR, and 7" # FR47FR. The 5" and 7" monitors will allow you to add side marker light cameras as well if you choose to down the road. Another common RV camera system is Voyager which has two monitor sizes; 4.3" # ASA87FR and 7" # ASA27FR. I recommend double checking the branding on your camera to ensure you choose the right monitor....
  view full answer...
• Can The Screen For A 4.3" RV Camera System Monitor Be Replaced
  The screen itself on an RV camera system monitor isn't a replaceable part and would require a complete replacement of the whole monitor. If you have a Voyager WiSight 2.0 system then you would need part # ASA87FR for the 4.3" monitor. For a Furrion Vision S camera system you would need part # FR77FR for a 4.3" monitor. If you do have a Furrion system and want to add on additional cameras either now or in the future then I recommend going with either the 5" # FR97FR or 7" # FR47FR monitors...
  view full answer...

Do you have a question about this Accessories and Part?