Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.
Features:
Specs:
Whether you're working or playing, the Adarac Pro Series truck bed ladder rack will haul your gear to a higher level. This aluminum rack lets you elevate long construction loads such as ladders, lumber, and pipes or recreational equipment like surfboards, snowboards, kayaks, and more.
Tonneau Cover Compatibility
This ladder rack works with Lomax hard tri-fold covers, Access roll-up covers, and most other inside-the-rail tonneau covers. Pairing your tonneau cover with the Adarac Pro creates a seamless, sophisticated look. And the framework of the ladder rack won't interfere with the framework of tonneau covers, in-the-bed toolboxes, or other gear.
Utility Rails and Slotted Crossbars
Take advantage of the utility rails and slotted crossbars with built-in mounting channels for quickly attaching accessories. Tie-downs (sold separately) attach to the utility rail's mounting channels and can be easily repositioned to secure additional cargo.
The slotted crossbars offer mounting channels on both the top and bottom of each bar. The anti-slip, anti-vibration rubber strip on each crossbar stabilizes your cargo. You can remove the rubber strip to utilize the top mounting channels.
The vertical uprights can be repositioned along or removed from the utility rails to accommodate the size of your load. Included channel nuts allow the uprights to slide closer to or further apart from one another along the rail's mounting channels.
Optional Load Stops
Sold separately are load stops that help contain your cargo and prevent it from shifting. They have integrated tie-down hooks that can be used to strap your load down. The load stops easily attach to the front or rear crossbar mounting channels and can be adjusted along the bars to accommodate the size of your load. Simply slide the load stops along the mounting channels into the desired positions, and then tighten for secure placement.
These load stops are constructed of durable, rustproof aluminum, and they have thick rubber casings to help stabilize cargo.
Easy, No-Drill Installation
The Adarac Aluminum Pro Series is easy to install with the included mounting hardware. No drilling is required.
The utility rails mount onto your truck bed rails with the included aluminum stake pocket inserts. The underside of the rails are foam-padded to protect your truck from scratches during installation.
Streamlined Aluminum Design
The Adarac offers a heavy-duty, streamlined design with an aluminum framework that is lightweight but tough. The rustproof, UV-resistant construction with an extruded anodized aluminum finish on the crossbars and rails provide added durability.
For a clear view, the angled uprights are positioned on the truck bed railing, and the crossbars run above your vehicle's roof. The tapered shape of the uprights create a clean look while maintaining durability. Hauling long loads across the durable aluminum crossbars leaves more room for other cargo and accessories in your truck bed.
Average Customer Rating: 4.9 out of 5 stars (33 Customer Reviews)
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.Ladder Rack came in earlier than expected to start. Good looking rack once installed and time will only tell how it holds up, but it seems good and sturdy. Easy to install but had to take into account the bedcover and readjust the rails with the upright arm mounts attached a few times. I've got a tri-fold bakflip cover. Giving it 4.5 stars because I had to mount rails all the way back so I could clear the upright arms with the bedcover. Doing so makes the rail not sit over front stake pocket by ~1/4 inch or so. Overall, it works and is safe + looks good on the truck!
Excellent materials, finish, and fit with the racks! The installation was simple, and the instructions were clear.
Looks great only thing was the directions really were no help so need to know little about it
This has been a great ladder rack. I purchased the rack to carry a two person 13' Vibe Fishing Kayak long distances as we travel with our camper. The Adarac Rack is easy to remove when not in use and the rails mounted to the truck look good either way. I paired the rack with a Lamma Rack to secure the kayak. Together it's a great system. Highly recommend!
This is a great, sturdy product. I purchased it to carry Kayaks and Canoes on my F150 and it's the only reasonably priced solution I could find that didn't require me to remove my Backflip bed cover. The only drawback is that it uses the stake holes in the bed to attach it and Ford covers the front ones up on the short bed version of the truck. If you have the long bed F150 you won't have any issues.
Real happy with this ladder rack. I ordered the aluminum series because the flat black series was not available at the time due to material availability. I used a good brand-name flat black paint and other than a few touch-ups, it's holding up well. The install was a little tricky getting the width right so I'd recommend following the directions exactly as listed in the instructions. My wife and I carry two kayaks, one a Pelican Catch 120 sit-on and one 10' Perception sit-in, with easy securing with Malone straps and no shifting nor sliding. This rack is solid and good looking. We especially like the fact that you can use it with a tonneau cover in place.
I love this rack system. Easy installation and looks great on my truck. Steve.
Easy, clean install; fits great on 2022 F-150 with BAKFlip MX4 Hard Tonneau Folding Cover.
Tried to get this locally installed. They said there were none available and couldn't order it. Basically I left there feeling disappointed.
After a Little research I decided to try etrailer. The people there are great and exceeded my expectations. They ordered it from the manufacturer and had it shipped directly from them. It arrived before I anticipated it would and I did the installation myself. Great product..thanks
Super strong / easy installation 30min
It’s been a wonderful rack !!
Best i have ever had
And I have had a few 5-6 over the last 40 years
Most to haul canoes kayaks ladders long lumber plywood mattress and box springs
But ……I am having to elevate my canoes on a elevated extension Closed cell foam to increase my height so the bow does not rub and rest on my Tundra roof.
Can do
Love the rack !
This rack is awesome! It fits with the toneau cover on the bed and the two do not interfere with each other. It is built tough, but it's light weight to handle, making it easy for one person to take off and put back on the truck alone. We use it to carry kayaks when we go camping, and got some extra tie-downs to hold the kayaks in place so they won't slide around. We take the rack arms off leaving the bed frames on the truck when not being used, so it's fast to just put the arms of the rack back on when needed. That way there is no need to readjust anything.
The rack is perfect for hauling our Kayaks. I painted mine satin black before I installed it to better match my truck.
Excellent for carrying kayaks and still being able to use a soft tonneau cover.
I bought this model to fit/accommodate the weather tech trifold alloy bed cover. I had to set the racks at the extreme ends to open the bed cover (required some trial and error).
Very pleased with the rack functionality and the look with the truck.
Love it! Holds my 14.5 ft kayak with no problem even with the 5.5 foot bed. Looks great on my truck!
This is a what I wanted, I only gave it four stars because the install video and instruction pamphlet do not completely represent a 2018 chevy colorado, had to call adarac to see what the issue was! You have to remove rear tail lenses for install, not overly difficult, you are left with 2 additional mounting plates. No wording of this which makes you scratch your head! Also you have to figure out distance in between bed for long mounting plates! overall I am satisfied with product and would purchase again from etrailer. In final I did speak with customer service and there was a little phone tag, always friendly and supportive. Thank you
well made versital rack looks like it should last along time
About the only rack that will work with a rail mounted cover. Works great for my 2 kayaks. Looks great too.
These worked out great for carrying my Kayak. Easy to put on and take off. i leave the rail on all the time and its not obtrusive.
Fit great on my 2013 F150 and do a great job for me. Like them very much.
Excellent rack . Lousy directions.
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.