See what our Experts say about this Ventline RV Vents and Fans

• Can The High Pointe Microwave # HP94ZR Be Vented To The Outside
  The High Pointe Over the Range RV Convection Microwave # HP94ZR can be vented outside but you'd need to pick up a bit of ducting and duct tape from your local hardware store to connect the vents on the top of the unit to an exterior vent. If you don't already have an exterior vent then we currently offer one in white # V2111-13 and black # V2111-55. You'll want to pick up some butyl tape # AL28FJ and some non-sag sealant # 344270341437-1 for a waterproof connection to the trailer wall.
  view full answer...
• Black Exterior Range Vent For Greystone 22" Range Vent
  Unfortunately Dean there is not a single vent cover used for your Greystone. You will need to compare your current vent and cutout to find the correct replacement vent from the list below. Ventline Exterior Wall Vent # V2111-55 (Cutout: 10-1/2" x 3-3/4", Outer: 11-9/16" long x 5-1/4" wide) B&B Endura Range Exhaust Vent 1-1/2" Flange # BM97GR (Cutout: 10-3/4" x 4", Outer: 12-9/16" long x 5-7/8" wide) B&B Endura Range Exhaust Vent 5/8" Flange # BM57GR (Cutout: 10-3/4" x 4", Outer: 12-9/16"...
  view full answer...
• Replacement For Range Hood Vent With Missing Damper
  Hello Sandi, Thank you for the photos though we do not have a damper that fits those dimensions; the best we can offer is a replacement vent, the Ventline Exterior Wall Vent # V2111-55 which fits a 10-1/2" wide x 3-3/4" tall rough opening.
  view full answer...
• Exterior Wall Vent Needed For A Furrion RV Range Hood
  You're correct that the Furrion Ducted RV Range Hood with Light # FHO23SACRBL rear vent is only 5-7/8" long x 3-1/4" tall, whereas our vents are all larger at 10-1/2" wide x 3-3/4" tall. Typically there will be some insulation in the wall only allowing for a small bit of room for air to escape from the range hood and out the exterior vent. This is pretty typical is a residential setting as well. If you wanted to better control the way if vents you could also use HVAC tape to seal up the...
  view full answer...
• Replacement Damper for 2004 Coachmen Catalina Lite
  We do offer a Replacement Damper for Ventline RV Range Hood w/ Horizontal Exhaust # BCA0472-00, which comes in a single piece and has overall dimensions of 9-7/16 inches long x 4-1/2 inches wide. This appears to match the dimensions you are needing based on the picture you included in your question. However, this damper is designed to fit the Ventline P, B, and T Series range hoods. Looking at your picture, it looks like what you have is similar to the Ventline Black # V2111-55, which...
  view full answer...
  
• What Exterior Wall Vent Can Be Used With the Furrion Ducted RV Range Hood?
  For the Furrion Ducted RV Range Hood with Light # FHO23SACRBL you're going to want to use the Ventline Exterior Wall Vent for RV Range Hood - Locking Damper # V2111-55. This vent will fit in 10-1/2" wide x 3-3/4" tall rough openings and has a collar depth of 1-3/4", but you'll want to measure your trailer's walls to determine the collar depth first. If it turns out you have 5/8" collar, then you'd want to use # V2111-03 instead. Any gaps that you may have can easily be covered with HVAC...
  view full answer...
• Replacement Ventline Trailer Vent Damper
  The dimensions of the Ventline Replacement Damper for Ventline RV Range Hoods # BCA0472-00 are 9-7/16- long x 4-1/2-inches wide. Based on your photo this replacement part does not appear to be compatible with the size of your vent opening. You may be better served by a replacement vent assembly like # V2111-55. Part # V2111-55 is designed to fit a rough trailer opening of 10-1/2- wide x 3-3/4-inches tall. I went to our warehouse to measure this item for you. The mounting holes are 1/8-inch...
  view full answer...
  
• Replacement Damper Lock for Ventline RV Range Hood
  The Replacement Damper for Ventline RV Range Hood part # BCA0472-00 is the damper located in the hood. If this is indeed the damper you are referring to then the correct lock spring is the Replacement Damper Lock Spring for Ventline RV Range Hood part # C0488-00. However, it sounds like you are referring to the damper in the exterior vent. If that is the case then we don't offer the locking tabs separately nor do I think they can be replaced so you will need to just replace the entire...
  view full answer...
  
• Recommended Exterior Wall Vent for Furrion Range Hood
  I spoke with Furrion about the Furrion Range Hood part # FHO23SACRVSS and they informed me that they use Lippert Exterior Wall Vents which we do not offer. That said, it does not matter what brand exterior wall vent you use as they are all pretty much universal. I recommend the Ventline Exterior Wall Vent part # V2111-13 for white or part # V2111-55 black as this will work just fine. The instructions for the Ventline Exterior Wall Vent are as follows: 1: Make sure outside wall surface...
  view full answer...
• How To Confirm Fit of Ventline Exterior Wall Vent for RV Range Hood on Jayco Jay Flight
  The Ventline Exterior Wall Vent for RV Range Hood part # V2111-55 is designed to be installed in a 10-1/2" wide x 3-3/4" tall opening. If this is what you have once the existing, partial vent is removed then it will be a great replacement option. That said, this is a universal product and not one I can confirm for any one particular trailer but it does appear to be very similar to one pictured so it should work to replace this.
  view full answer...
  
• What Exterior Vent Cover do I Need for My Range on My 2020 Forest River Alpha Wolf Travel Trailer?
  Without knowing the exact dimensions of your 2020 Forest River Alpha Wolf 26RL-L's range vent opening, we do have vents that may fit your application: - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-55 - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03 Both of these vents have 10-1/2" wide x 3-3/4" tall rough openings. The # V2111-55 has a collar depth of 1-3/4" while the # V2111-03 has a collar depth of...
  view full answer...
• Damper Operation & Installation of Ventline Exterior Wall Vent for RV Range Hoods V2111-55
  Yes, the internal damper in the Ventline Exterior Wall Vents for RV Range Hoods, parts # V2111-55 in black and # V2111-13 in white, opens automatically when you turn on the exhaust fan in your RV's kitchen range hood. These vents also have a locking feature for the damper that lets you keep it secured in the closed position. Two swiveling latches, one on each end of the damper panel, allow you to secure the damper for off-season storage or when in extreme temperatures when you will want...
  view full answer...
• Are Replacement Clips Available For The Ventline Exterior Wall Vent For RV Range Hood
  The clips for the Ventline Exterior Wall Vent for RV Range Hood # V2111-55 are not sold separately so you would need to completely replace the vent.
  view full answer...
• How To Vent A Furrion Propane RV Range
  The Furrion Propane RV Range with Glass Cover # FR37KR has vents built into the door and on top at the back just like a residential stove/oven. If you wanted to vent it to the outside you would use a range hood like the Furrion Ducted RV Range Hood with Light - 12V # FHO23SACRBL. A range hood would require an opening in the exterior wall and a vent like the Ventline Exterior Wall Vent for RV Range Hood # V2111-55.
  view full answer...
• How to Determine the Correct Outside Range Hood Vent
  When trying to find a replacement for your outside range hood vent the most important measurement is the opening where the exhaust ducting or outlet exits your RV. Each of the outside range hood vents we carry will fit a roughly 10-1/2" wide x 3-3/4" tall rough opening and will require 10 Screws # 31071 and Sealant # 0160297 to install. The Ventline Wall Vents # V2111-13 and # V2111-55 have a 1-3/4" collar, and # V2111-03 has a 5/8" collar.
  view full answer...
• Troubleshooting A Furrion RV Microwave That Doesn't Vent Well
  To find out why the Furrion Over the Range RV Convection Microwave # FMCM15SS isn't properly venting you'll need to remove it from the wall and check the ductwork running from the microwave to the outside of the trailer. These ducts can get clogged up over time and prohibit air flow causing the issues that you're currently facing. A majority of the venting process is done with the rear vent and not the front one that you were referring to. Another possibility is that you do not have any...
  view full answer...
• Recommended Range Hood for Trailer with 12 Inch Deep Cabinets
  The Ventline S0721 Series RV Range Hood part # S0721-20BD-F-1 for black or part # S0721-20WD-F-1 for white is just what you are looking for. The portion of the vent (flange) that mounts to the bottom of the cabinet is 12" deep which is the least we offer so it should be a perfect fit. It comes with a 12 volt motor and light, although incandescent. For reference, the width is 20". In regards to height, this is listed as 5-1/2" tall. Please note, you will need to run a vent to the exterior...
  view full answer...
• Dimensions Of The Ventline Exterior Wall Vent for RV Range Hood
  The Ventline Exterior Wall Vent for RV Range Hood # V2111-55 has an overall width of 11-1/2" and height of 5-1/4". The collar is 1-3/4" deep and is designed to fit a 10-1/2" wide x 3-3/4" tall rough opening. Installation hardware isn't included so you'll want to pick up some screws from your local hardware store and some non-sag sealant # 344270341437-1 to seal around the edge of the vent for a waterproof seal.
  view full answer...
  
• Vent Recommendation for Fitting Wall Hole of 3 inch by 10 inch
  We have wall vents like the part # V2111-55 which is very close to the dimensions you listed it. It fits an opening of 10-1/2 inches by 3-3/4 inches.
  view full answer...
• Collar Depth of Ventline Exterior Wall Vent for RV Range Hood # V2111-55
  Sounds like you are asking about the collar depth of the Ventline Exterior Wall Vent for RV Range Hood # V2111-55. This dimesnion is 1-3/4 inches.
  view full answer...
  
• Does The Ventline Pinnacle Ducted RV Range Hood # VE38SR Come With An Exterior Vent
  The Ventline Pinnacle Ducted RV Range Hood with Light # VE38SR does not come with an exterior vent so you would need to purchase one like the Ventline Exterior Wall Vent for RV Range Hood # V2111-55 separately.
  view full answer...
• Recommended Ducted RV Range Hood For A 1986 Pilgrim Truck Bed Camper
  I understand the difference between ductless and ducted range hoods why you'd want the ducted to be able to exhaust the air/fumes out of your camper. The reason I gave you a ductless option was simply because you stated you didn't have anything currently, which would mean there's no duct for the range hood to vent through. Since you're ok with cutting into the wall and building your own duct you'll still have the same options as far as color/style goes: Black # VE38SR Black With Stainless...
  view full answer...
• Replacement Exterior Range Vent for RV
  We do carry range hood exterior wall vents and all of them are 10-1/2 inches wide by 3-3/4 inches tall. Here are the options we have: Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-13 Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03 Ventline Exterior Wall Vent for RV Range Hood - Louvered - Damperless - 1-3/4" Collar # V2018-01 Ventline Exterior Wall Vent for RV Range Hood - Louvered - Damperless - 1/2" Collar...
  view full answer...
• Are There Instructions For Installing the Exhaust Duct On the Greystone Range Hood
  I took a look at the installation instructions for the Greystone Range Hood part # 324-000086 which are included with the unit for you and they do not specify the routing for the exhaust vent. This part of the install process, the duct work will be up to the user to decide. For an exterior vent you can use the Ventline Exterior Wall Vent for RV Range Hood part # V2111-55.
  view full answer...

Do you have a question about this RV Vents and Fan?