See what our Experts say about this Inno Roof Rack

• Recommended Low Profile Roof Rack For 2019 Mini Countryman With Sunroof
  I do have a couple of options for the 2019 Mini Countryman with sunroof. The Rola that you were looking at only fits the 2007 to 2010 BMW X5. Both options I recommend below do fit with a sun roof but it is recommended to keep the sunroof closed when carrying accessories. The roof could interfere with accessories on the bar and it also creates a lot of wind noise. If you prefer the bars to be flush with the feet like the Rola rack, I recommend the Inno Aero Crossbars part # INXB100-2 with...
  view full answer...
  
• Carrying Full Sheet Of Plywood on Roof of 2002 Jeep Grand Cherokee
  Since your Jeep Grand Cherokee already has a roof rack and crossbars, you should already have the ability to carry loads up to the roof rack's capacity. If you were to remove the crossbars from your factory rack (assuming that they're removable), and add an Inno crossbar system that uses part # INXB100-2 and # INXS100, you'd have crossbars with a 165 lb capacity. However, this capacity could be limited if the actual roof of the vehicle has a lower capacity. My fear of carrying something...
  view full answer...
• Can The Thule Pulse Medium Rooftop Cargo Box 14 Cu Ft Be Used On Inno Aero Crossbars?
  The Thule Pulse Medium Rooftop Cargo Box - 14 cu ft - Matte Black # TH614 is absolutely compatible with the Inno Aero Crossbars that you were looking at. For your 2017 Subaru Forester with raised side rails running front to back you will want to go with Inno Aero Crossbars - Aluminum - Black - 39" Long # INXB100-2 with Feet # INXS100. The cargo box does have the ability to be locked which is a nice feature to have. Personally, I think this is one of the best looking roof boxes on the market...
  view full answer...
• Roof Rack Recommendation for a 2015 Audi Q7
  It looks like the 184002 fit kit from Thule has been discontinued so while the Thule AeroBlade Edge # TH7602-TH7602 is still a valid part, this means that we will need to go a different direction for your 2015 Audi Q7. I recommend going with the Thule WingBar system because it is the upgrade to the AeroBlade Edge, but if you're more concerned about a roof rack that has crossbars that end in the legs then you'll need to go with the Inno roof rack instead. I will list both options below...
  view full answer...
• Parts Needed to Add a Roof Rack and Roof Cargo Box on a 2001 Toyota Corolla
  For your 2001 Toyota Corolla, the Yakima roof rack with Q-clips has been discontinued. They don't currently have a system for your vehicle, so I recommend the Inno roof rack. It consists of # INXB100-2, # INXS200, and # INK134. Once you have a roof rack setup installed, you can use a cargo box to transport extra gear on the roof rack. I would recommend a shorter box on the Corolla like the Yakima RocketBox Pro 14, # Y07192, due to the shorter length of the roof on your Corolla. I added...
  view full answer...
• Roof Rack Recommendation for 2002 Subaru Impreza
  For your 2002 Subaru Impreza WRX sedan the Inno roof rack part numbers # INXB100-2, # INXS200, and # INK106 is a confirmed fit and would be a great solution to carry your roof basket.
  view full answer...
• Roof Rack Recommendations for a 2016 Subaru Forester with Side Rails
  I will be happy to make some roof rack recommendations for your 2016 Subaru Forester with the factory side rails. My top pick is the Thule AeroBlade Edge, # TH7502B-TH7502B for black bars or # TH7502-TH7502 for silver bars. The Thule AeroBlade bars have a wing shape for less wind resistance and noise compared to round or square bars. They are made of light weight aluminum for both strength and corrosion resistance. And the Edge versions look more like a factory roof rack than other models. My...
  view full answer...
• Recommended Replacent for Q-Clip Roof Rack for a 2013 Hyundai Accent GLS
  The correct Yakima Q Clips for your 2013 Hyundai Accent GLS are the Q35 Q Clips for the rear crossbar and the Q99 Q Clips for the front crossbar. These products are no longer made by the manufacturer, so if you aren't able to find something used, then I recommend replacing your roof rack. The roof rack I recommend for your Accent is the Inno Roof Rack # INXB100-2, # INXS200, and # INK752. This will give you aero crossbars for less wind noise and compatibility with more accessories. It...
  view full answer...
• Parts Needed to Install a Roof Mount Luggage Rack on a 1999 Toyota Corolla 4 Door Sedan
  For a roof rack on your 1999 Toyota Corolla I recommend the Inno roof rack consisting of: Inno Aero Crossbars - Aluminum - Black - 39" Long # INXB100-2 Inno Flush Feet f# INXS200 Custom Fit Kit # INK134 These parts are easy to remove and install after initial installation and should not cause any damage to the car when properly installed using the manufacturers instructions. Once you have the roof rack installed, you can use a roof cargo box to carry your luggage. I recommend the Thule...
  view full answer...
• Recommended Roof Rack and Wind Fairing for a 2016 Scion iM
  There is not a standard size wind fairing for your 2016 Scion iM. The wind fairing will need to match the distance between the mounting feet on your roof rack and since there are several different roof racks for your iM, the wind fairing will vary depending on which you have. For a roof rack, I recommend the Inno Aero Crossbar System which is composed of part # INXB100-2, part # INXS200, and part # INK467. This system has a very sleek design with aero crossbars that reduce both wind noise...
  view full answer...
• Roof Rack Recommendation for a 2016 Scion iM
  For your 2016 Scion iM the Inno Roof Rack part numbers # INXB100-2, # INXS200, and # INK467 has been confirmed as a fit and would work well.
  view full answer...
• Which Roof Rack Will Fit A 1999 Toyota Corolla
  The Yakima roof rack that will fit your 1999 Toyota Corolla is the Inno Aero Crossbars # INXB100-2, Inno Flush Feet # INXS200, Custom Fit Kit # INK134. This rack is a solid foundation for anything you'll be carrying and is compatible with your Corolla. Anytime you are going to be carrying cargo on your roof you will want to check your owners manual or with the Toyota dealer on what the weight capacity is on the roof of your vehicle. You will need to go by the lowest rated component in...
  view full answer...
• Available Inno Roof Rack Fits for 2018 Honda HR-V with Flush Roof Rails
  We offer three roof rack systems from Inno that fit the 2018 Honda HR-V with flush mount roof rails. Please note that none of these are square bar racks; all use Inno's Aero crossbars, which for your vehicle are available in three bar lengths. You can see all of these on the linked page. With these racks you have a choice of a flush fit for the Aero crossbars with the rack feet or to have longer bars that extend out past the rack feet. The flush system uses 39-inch bars and consists of...
  view full answer...
• Is SportRack SkyLine XL Cargo Box Compatible With Inno Aero Crossbars On 2017 Corolla?
  The Inno Aero Crossbars 39" # INXB100-2 with Feet # INXS200 and Fit Kit # INK306 would work well on your 2017 Toyota Corolla with the naked roof. This setup will be able to accommodate your SportRack SkyLine XL Cargo Box SR7095. I attached demonstration videos for you to check out regarding this roof rack and roof box.
  view full answer...
• Roof Rack, Cargo Box and Paddleboard Carrier Recommendations for a 2010 BMW 335i Coupe
  The Inno roof rack # INXB100-2, and # INXS100 is a great choice for your 2010 BMW 335i coupe. Any rack is going to take a little time to take off. But the great thing about that is the more you install and remove the rack the easier and faster it gets. For a compatible cargo box I recommend the Horizon, # SR7011. For a SUP/surfboard carrier I recommend the Thule SUP Shuttle, # TH811XT. It will fit the Inno crossbars. I have linked a video review of this carrier as well. Please consult...
  view full answer...
• Best Roof Rack and Bike Rack for a 2019 Toyota RAV4 with Raised Side Rails
  The best option we have for you to carry bikes on your 2019 Toyota RAV4 as of today would be to use a roof rack and roof mounted bike rack. This is a great option nonetheless as it will not add any length to your vehicle like a hitch bike rack would and you would be able to carry a bike that weighs more than 35 lbs unlike a trunk mounted bike rack. The best feature however that the other two types of bike carriers do not offer is that you can use the roof rack for many other things such...
  view full answer...
• 2014 Subaru Forester Roof Rack Recommendation
  To complete a roof rack on your 2014 Subaru Forester all you would need are the components that you referenced: Inno Aero Crossbars # INXB100-2 Inno Stays for Multi Systems # INXS300 Inno Fit Kit Hooks # INTR145
  view full answer...
• Aluminum Roof Rack for Carrying Surfboards on 2018 Subaru Forester
  We can offer you aluminum bar aero roof racks for your 2018 Subaru Forester for both of its possible roof setups, either raised side rails or a bare roof without fixtures. All appear on the linked page where you can click on the roof type you have to then see only the options that work with that specific roof configuration. Do please note that while the crossbars are all-aluminum there are still some steel components in the foot assemblies because that stronger material is essential in...
  view full answer...
• Recommended Inno Roof Rack on a 2017 Subaru Forester w/o Factory Side Rails
  For your 2017 Subaru Forester without the factory side rails, I recommend the Inno Aero Crossbars # INXB100-2, the Inno Flush Feet # INXS300, and the Custom Fit Kit # INTR145. This roof rack has a low-profile design and along with the elliptical crossbar design makes the Inno rack aerodynamic. The aerodynamic design will cut down on wind drag and noise will the vehicle is in transit.
  view full answer...
• Looking For Replacement Base Pads For The Inno Flush Feet INXS300
  Hello Christoph, thanks for reaching out. It sounds like you are looking to replace the base pads from the Inno Flush Feet # INXS300. I am sorry to say that we do not offer this part separately. You may want to try reaching out directly to Inno to see if they can provide one, otherwise the only solution I can offer you is to get a whole new set of feet since they come with the base pads.
  view full answer...
• How to Carry 2 Kayaks and a Canoe With 2000 Chevy Suburban
  To carry a pair of kayaks and that large of a canoe with your 2000 Chevy Suburban you are going to need a roof rack and trailer. The roof rack that will work for your vehicle depends on if it has the factory installed raised rails that run front to back or the factory installed tracks, and please be sure to look in your owner's manual to determine if your roof can handle the weight capacity of your canoe. If your Suburban has the raised side rails and is NOT the Z71 model, the roof rack...
  view full answer...
• Recommended Roof Rack System for a Yakima SkyRise HD Tent on my 2016 Lexus GX 460
  I recommend using a rack system like the Inno system which consist the Inno Aero Crossbars part # INXB93-100, the Inno Flush Feet for Aero Crossbars part # INXS300 and the Custom Fit Kit for Inno Roof Rack Feet part # INTR152. The reason we can use tents like the Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 is because the weight ratings are for a moving load when the vehicle is parked they rate the rack a bit higher allowing us to get up to the capacity of the tent. The...
  view full answer...
• What Roof Rack Should I Buy for My 2021 Toyota RAV 4 with Flush Factory Rails?
  For a great economical Inno rack that is compatible with your 2021 Toyota RAV4, has an aerodynamic design that lessens wind noise, includes an easy installation, and has locks, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 39" Long and 42" Long - Qty 2 # INXB100-108 - Inno Flush Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS300 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR I went ahead and attached...
  view full answer...
• Low Profile Roof Rack For 2004 Yukon Denali
  The Carr Low-Profile Light Mounting Bar # CARR210501 will not fit. But I have something that will! If you have factory installed raised rails on your 2004 Yukon Denali the lowest profile crossbars would be the Yakima FlushBar Crossbars # Y00444-2 and you'll need this custom fit kit # Y00158. If you don't have raised rails the lowest profile option would be the Inno Aero Crossbars # INXB115-2 with the flush feet # INXS300 and the custom fit kit # INTR501. We don't have a roof rack that...
  view full answer...
• Roof Rack Recommendation for 2014 Subaru Impreza with Naked Roof
  For your 2014 Subaru Impreza wagon there are no roof rack options that will attach with a factory fixed point style attachment as that's not a current option for your vehicle. My solution for you will work as long as you do not have the WRX model. Since your vehicle has a naked roof, you'd need to use a roof rack that uses clamps to attach to the door frame. For that you'd want the INNO part # INXB100-108, # INXS300, and # INTR145.
  view full answer...
• 2014 Subaru Forester Roof Rack Recommendation
  To complete a roof rack on your 2014 Subaru Forester all you would need are the components that you referenced: Inno Aero Crossbars # INXB100-2 Inno Stays for Multi Systems # INXS300 Inno Fit Kit Hooks # INTR145
  view full answer...
• Aluminum Roof Rack for Carrying Surfboards on 2018 Subaru Forester
  We can offer you aluminum bar aero roof racks for your 2018 Subaru Forester for both of its possible roof setups, either raised side rails or a bare roof without fixtures. All appear on the linked page where you can click on the roof type you have to then see only the options that work with that specific roof configuration. Do please note that while the crossbars are all-aluminum there are still some steel components in the foot assemblies because that stronger material is essential in...
  view full answer...
• Roof Rack and Cargo Basket for 2016 Lexus GX 460 to Carry Cargo Bag
  Your best solution is going to be to install a roof rack on your 2016 Lexus GX 460 like the Inno part numbers # INXB93-100, # INXS300, and # INTR152 so that you can then mount a basket to the bars like the Thule Canyon XT # TH859XT and easily carry your cargo bag.
  view full answer...
• Recommended Inno Roof Rack on a 2017 Subaru Forester w/o Factory Side Rails
  For your 2017 Subaru Forester without the factory side rails, I recommend the Inno Aero Crossbars # INXB100-2, the Inno Flush Feet # INXS300, and the Custom Fit Kit # INTR145. This roof rack has a low-profile design and along with the elliptical crossbar design makes the Inno rack aerodynamic. The aerodynamic design will cut down on wind drag and noise will the vehicle is in transit.
  view full answer...
• Solution for Carrying 2 Kayaks on 2018 Mazda CX-5 With Factory Roof Rack
  You can use a carrier with load assist like the Malone SeaWing Kayak Carrier # MPG113MD or the Malone DownLoader Kayak Carrier # MPG114MD-351XL with your factory crossbars that do not extend beyond the feet. The problem you have is the lack of space to use two. The best solution for carrying two kayaks on your 2018 Mazda CX-5 would be to use the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000. Although it does not have load assist, it will fit on your existing crossbars and...
  view full answer...
  
• 2019 Mazda CX-5 Roof Rack Recommendation for Roof Cargo Box
  I recommend installing the Inno Aero roof rack system on your 2019 Mazda CX-5 flush rail roof so you can transport a cargo box: 45" and 48" Inno Aero Crossbars - # INXB115-123 Through Feet - # INXS350 Fit Kit - # IN53FR I really like this system because it is cost-effective and looks sleek, plus you won't be sacrificing quality as this rack comes with a nice aero-dynamic design and actually includes locks for the feet. The Malone Cargo12 # MPG901 is a solid choice for a roof cargo box...
  view full answer...
• Thule Square Bar Roof Rack for 2022 Mazda CX-5 with Flush Rails
  The Inno square bar roof rack that fits your 2022 Mazda CX-5 with flush rails is the part numbers # INB117, # INXP, # IN53FR. This will work perfectly with your older Hullavator. The Evo flush rails are not what you are looking for. The Inno square bar are exact same dimensions as Thule bars.
  view full answer...
• Inno Feet for Mazda CX-5 With Factory Flush Roof Rails
  If you are wanting to go with a Inno roof rack and you have factory rails on your 2020 Mazda CX-5, you have two options. If you want the aero style crossbars grab these bars # INXB115-123 the Inno Through Feet # INXS350 and the custom fit kit # IN53FR. If you have the square bars # INB117 you will need these feet # INXP and this fit kit # IN53FR
  view full answer...
• Recommended Inno Roof Rack Feet For A 2020 Mazda CX-5 With Flush Mounted Rails
  Since your 2020 Mazda CX-5 has flush mounted rails the Inno Feet for Square Crossbars # INFR you referenced wouldn't be able to slip under the rails for mounting. Instead, I recommend the Inno Through Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS350 and Custom Fit Kit for Inno Roof Rack Feet # IN53FR. These two components will allow you to install some Inno Aero Crossbars # INXB115-123 so that you can complete your roof rack. I've attached a short video below where Adam...
  view full answer...
• Inno Square Bar Roof Rack that Fits 2023 Mazda CX-5 with Flush Bars
  Inno has a square bar roof rack that fits your 2023 Mazda CX-5 with the part numbers # INB117, # INXP, # IN53FR. Since you already have the Inno square bars you may be able to get by with just the part # INXP, and # IN53FR.
  view full answer...
• Correct Inno Square Crossbar Roof Rack for a 2023 Mazda CX-5
  If you don't have flush side rails on your 2023 Mazda CX-5 then in order to add a Inno Square Crossbar Roof Rack you'll need part # INB137, part # INSUT, and part # INK497. If you do have flush side rails then you'll want to use the Inno Square Crossbar Roof Rack part # INB117, part # INXP, and part # IN53FR. These are both great systems, it's just a matter of choosing the correct one based on what type of roof you have.
  view full answer...
• Do the Malone AirFlow2 # MPG215 Fit My 2021 Mazda CX-5 with Flush Rails?
  I have a great solution for your 2021 Mazda CX-5 with flush rails. However, the Malone AirFlow2 - 50" # MPG215 definitively does not fit your vehicle. This is because the AirFlow2 model is designed to fit raised factory rails. With that being said, we do have an aero crossbar system that does fit. For that route, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 45" Long and 48" Long # INXB115-123 - Inno Through Feet for Aero Crossbars - Fixed Mounting Points...
  view full answer...
• Solution For Carrying 3 Bikes On A 2016 Mazda CX-5 With 1-1/4" Hitch Receiver
  When using a 1-1/4" trailer hitch receiver, you are limited to 2 bikes and cannot carry 3 bikes; this is because class 1 receivers are not designed to hold that much weight. For a 2-bike carrier you could go with the Saris SuperClamp EX Bike Rack 1-1/4" and 2" Hitches # SA4025F. This has a weight capacity of 60lbs per bike. Then if you have a 3rd bike that you need to carry you can add a roof-mounted bike rack such as Swagman Upright Bike Rack # S64720. For this you will need a roof rack...
  view full answer...

Do you have a question about this Roof Rack?