Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a damaged fan motor on your RV range hood or roof vent. If replacing an older model motor, a new fan blade (sold separately) is also required. Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.
Features:
Specs:
This fan motor can replace older, obsolete motors. However, older fan blades won't fit on the new motor; so, if you are replacing an older motor, you should order a new, compatible fan blade with your replacement motor. To determine whether you have an old or new motor, measure the length of the motor from end to end (excluding shafts and mounting hardware, measuring just the case.) If the motor measures 2", it is an older motor, and the fan blade should be replaced with the motor. A new motor measures 1-1/2" in length.
The following diagram shows the placement of the motor in Ventline roof vent model V2119:
The following diagram shows the placement of the motor in Ventline roof vent model VP-543:
A very good product for the money.
Everything was delivered quickly and fit perfectly. Thanks so much
I have just unpacked the shipment, and have not had a chance to try to install the items, therefore can not make a valid judgement at this time.
Thank you very much for the prompt service, The product fit and work great. It was the most pleasure doing business with your company, and
the friendly and concern person I spoke with, and was able to understand that person. I would definitely recommend you product and your company.
John P.
Website was user friendly and easy to use. Parts were correct and good quality. All though there was a delay in shipment from the factory I was kept informed by etrailer and they expedited shipment to me as soon as they received the parts. I would not hesitate to use them again.
The picture of the motor and componets is correctly displayed as to what I received. At first I thought the metal plate was for a different mounting bracket as the mounting holes are spaced different for the replacement motor. This could not work as there is no hole for the motor shaft so I figured that the plate is for a hole drilling template to be able to properly drill two small holes in the vent cross bracket for attaching the new motor. I'm not sure what the extra screws were for.
Had to relace fan motor for an RV. Fan assy. no longer available. Ordered the fan motor and blade and rebuit the assy. I had. Fit great !
Fan motor was easy to install and quiet. Shipping was quick and packed well. I am very happy with the product
Expensive little gadget but exact replacement fit and works perfectly.
Replaced the motor in our range vent fan. This was a direct fit for the 2022 2225RL Winnebago Micro Mini. Quieter than the original
Etrailer.com has the fan motor and fan blade that local retailers do not, and they provide excellent support which, in this case, was crucial. They looked at the photos I sent of the old motor and disintegrated fan from my 30-year-old1985 Lance Model 300 8'6" camper and decided the BVD0218 motor and BVD0215 fan would work; we could not ID the old motor manufacturer, so it was anybody's guess - my old motor may have been for a Jenson, but the replacement cost twice as much, expensive for potluck.
The parts arrived lickety-split and I was able to find instructions for the install (I know nothing about electrical); the template was a brain-teaser until I came upon an explanation of how to screw the template into the old motor's holes and drill through the template's new holes.
In all it took about 2½ hours including set-up and clean-up mostly because the mounting bracket from the old motor did not work with the new motor. When the template was placed over the old bracket to show where to drill the new holes, the template's new screw holes were in the middle of a large opening in the middle of the old bracket – sucking air.
Rather than make an entirely new bracket I opted for modifying the old bracket by grinding into the back of the opening far enough to accommodate the much smaller new motor and have metal on each side for the new screw holes (see diagram).
That done we replaced the wires leading from the old motor with the wires from the new motor using crimp connectors and turned on the switch – the new motor ran just fine (the crimp connectors were something of a small adventure as we do not have a crimping tool; had to use ordinary pliers, place a wire between the cutting edges at the bottom of the pliers jaw and squeeze just so much – too much and we’d cut through the connector, which we did once).
Attached the fan and reassembled the vent and tested again and then cleaned up everything. Can’t imagine how the work would have gone if some hired handyman had done it. After it was all over we were feeling pretty chipper for a while, having installed my very first (and hopefully last) electric exhaust fan.
The first photo illustrates the juxtaposition of the old bracket and the template. The next photo is of the instructions from Ventline I downloaded from eTrailer.com. The last two photos are of the old motor and fan.
James
9/30/2016
Fan motor still quietly humming along. Looks like eTrailers sold a lot more of them since I posted in 2015.
The motor worked fine. It’s the second one we bought (we have 2 bathrooms). Working with Etrailer was a great experience. They have great customer service!
Perfect Replacement
Gwendolyn Y.
4/18/2025
I'm a fan of your picture, David :)
This motor was super easy to install and works perfectly to power my bathroom fan.
Works like factory one! Plug and play
Order arrived promptly and was the exact fit for our burned out fan motor. Product was half the cost a local dealer wanted so we were able to buy two and have one for a spare. Extremely happy with etrailer whenever we need parts for our trailer.
Mike
12/2/2022
Bathroom replacement fan is still going strong along with the factory fan in the bedroom and we still have our spare in reserve. Considering the RV dealer in Oregon wanted $XX for just one it was a great deal! Thanks Patrick.
This was a perfect replacement for the original fan in the Freedom Express Camper. All I had to do was pull the blade off of the motor, unscrew 2 screws, pull the leads off of the old motor, then reverse the process on the new motor. No wiring, no soldering. Simple.
Used your website to see how to replace the fan motor, placed my order easily and on receipt of the motor had it installed in less than 5 minutes and running. Thank you for your great website and quick turnaround
Suzanne
8/4/2020
Fan motor is still going strong after a year. Thanks again for the fast service and great product
Part was as described, fitting perfectly. It was easy to install as well.
Only worked for 4 months then purchased another. That one is now bad.
This motor is not durable.
Ive o believe it’s better to replace the fan entirely and replace it with another that’s more durable and moves more air.
Easy install and works quietly
Great Quality
Great instructions
Great SUPER FAST Shipping!!
Easy to Install!!!
Thank YOU!!!
Daniel Z.
8/5/2015
STILL GOING STRONG!!
Worked Great, quick delivery and easy to install.
Purchased this fan 11/8/2024, the fan just died on 9-18-2025. Pretty disappointed it didn't even last a year!
This motor is an exact OEM replacement for my Ventline V2094 bathroom exhaust fan. Installation was very easy thanks to the video provided on the etrailer web site. I couldn't be happier with the product and the great service etrailer gave me.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arnold
10/21/2025
Its been one year 5-6 camp trips and this shower exhaust fan is still working perfectly.